View R5F6411FNFN_4543532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

R32C/111 Group Datasheet
R32C/111 Group
RENESAS MCU
REJ03B0227-0110 Rev.1.10 Sep 17, 2009
1.
1.1
Overview
Features
The M16C Family offers a robust platform of 32-/16-bit CISC microcomputers (MCUs) featuring high ROM code efficiency, extensive EMI/EMS noise immunity, ultra-low power consumption, high-speed processing in actual applications, and numerous and varied integrated peripherals. Extensive device scalability from low- to high-end, featuring a single architecture as well as compatible pin assignments and peripheral functions, provides support for a vast range of application fields. The R32C/100 Series is a high-end microcontroller series in the M16C Family. With a 4-Gbyte memory space, it achieves maximum code efficiency and high-speed processing with 32-bit CISC architecture, multiplier, multiply-accumulate unit, and floating point unit. The selection from the broadest choice of onchip peripheral devices -- UART, CRC, DMAC, A/D and D/A converters, timers, I2C, and WDT enables to minimize external components. The R32C/100 Series, in particular, provides the R32C/111 Group as a standard product. This product, provided as 100-pin plastic molded LGA, and 100-/80-/64-pin plastic molded LQFP package, configures a maximum of nine channels of serial interface.
1.1.1
Applications
Audio, cameras, television, home appliance, printer, meter, office/industrial equipment, communication/ portable devices
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 1 of 99
R32C/111 Group
1. Overview
1.1.2
Performance Overview
Table 1.1 to Table 1.6 show the performance overview of the R32C/111 Group. Table 1.1 Unit CPU R32C/111 Group Performance for the 100-pin Package (1/2) Function Central processing unit Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 256 to 512 Kbytes RAM: 32 to 63 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Low voltage detector Clock generator Optional (1) Low voltage detection interrupt * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode * Address space: 4 Gbytes (of which up to 64 Mbytes is user accessible) * External bus Interface: Support for wait-state insertion, 4 chip select outputs, 3V/5V interface * Bus format: Separate bus/Multiplexed bus selectable, data bus width selectable (8/16 bits) Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels 15 bits x 1 (selectable input frequency from prescaler output) 4 channels * Cycle-steal transfer mode * Request sources: 51 * 2 transfer modes: Single transfer, repeat transfer * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer * 2 input-only ports * 82 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports DMAC
Memory
Voltage Detector Clock
External Bus Expansion
Bus and memory expansion
Interrupts
Watchdog Timer DMA
DMAC II
I/O Ports
Programmable I/O ports
Note: 1. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 2 of 99
R32C/111 Group
1. Overview
Table 1.2 Unit Timer
R32C/111 Group Performance for the 100-pin Package (2/2) Function Timer A Performance 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 16-bit timer x 6 Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer
Timer B
Three-phase motor control timer Serial Interface
UART0 to UART8 Asynchronous/synchronous serial interface x 9 channels * I2C-bus (UART0 to UART6) * Special mode 2 (UART0 to UART6) * IEBus (1) (optional (2)) (UART0 to UART6) 10-bit resolution x 26 channels Sample and hold functionality integrated 8-bit resolution x 2 CRC-CCITT (X16 + X12 + X5 + 1) 16 bits x 16 bits Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (1) mode (optional (2)) Programming and erasure supply voltage: VCC1 = VCC2 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming 50 MHz/VCC1 = 3.0 to 5.5 V, VCC2 = 3.0 V to VCC1 -20C to 85C (version N) -40C to 85C (version D) 32 mA (VCC1 = VCC2 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = VCC2 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) 100-pin plastic molded LQFP (PLQP0100KB-A) 100-pin plastic molded TFLGA (PTLG0100KA-A)
A/D Converter D/A Converter CRC Calculator X-Y Converter Intelligent I/O
Flash Memory
Operating Frequency/Supply Voltage Operating Temperature Current Consumption Package
Notes: 1. IEBus is a trademark of NEC Electronics Corporation. 2. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 3 of 99
R32C/111 Group
1. Overview
Table 1.3 Unit CPU
R32C/111 Group Performance for the 80-pin Package (1/2) Function Central processing unit Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 128/256 Kbytes RAM: 32 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Low voltage detector Clock generator Optional (1) Low voltage detection interrupt * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels 15 bits x 1 (selectable input frequency from prescaler output) 4 channels * Cycle-steal transfer mode * Request sources: 47 * 2 transfer modes: Single transfer, repeat transfer * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer * 1 input-only port * 65 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports DMAC
Memory
Voltage Detector Clock
Interrupts
Watchdog Timer DMA
DMAC II
I/O Ports
Programmable I/O ports
Note: 1. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 4 of 99
R32C/111 Group
1. Overview
Table 1.4 Unit Timer
R32C/111 Group Performance for the 80-pin Package (2/2) Function Timer A Performance 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 16-bit timer x 6 (1) Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer Asynchronous/synchronous serial interface x 7 channels * I2C-bus (UART0 to UART5) * Special mode 2 (UART0 to UART3, UART5) * IEBus (2) (optional (3)) (UART0 to UART5) 10-bit resolution x 26 channels Sample and hold functionality integrated 8-bit resolution x 1 CRC-CCITT (X16 + X12 + X5 + 1) 16 bits x 16 bits Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (2) mode (optional (3)) Programming and erasure supply voltage: VCC1 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming 50 MHz/VCC1 = 3.0 to 5.5 V -20C to 85C (version N) -40C to 85C (version D) 32 mA (VCC1 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) 80-pin plastic molded LQFP (PLQP0080KB-A)
Timer B
Three-phase motor control timer Serial Interface UART0 to UART5, UART8
A/D Converter D/A Converter CRC Calculator X-Y Converter Intelligent I/O
Flash Memory
Operating Frequency/Supply Voltage Operating Temperature Current Consumption Package
Notes: 1. Timer B4 is available in timer mode only. 2. IEBus is a trademark of NEC Electronics Corporation. 3. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 5 of 99
R32C/111 Group
1. Overview
Table 1.5 Unit CPU
R32C/111 Group Performance for the 64-pin Package (1/2) Function Central processing unit Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 128/256 Kbytes RAM: 32 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Low voltage detector Clock generator Optional (1) Low voltage detection interrupt * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels 15 bits x 1 (selectable input frequency from prescaler output) 4 channels * Cycle-steal transfer mode * Request sources: 45 * 2 transfer modes: Single transfer, repeat transfer * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer * 1 input-only port * 49 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports DMAC
Memory
Voltage Detector Clock
Interrupts
Watchdog Timer DMA
DMAC II
I/O Ports
Programmable I/O ports
Note: 1. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 6 of 99
R32C/111 Group
1. Overview
Table 1.6 Unit Timer
R32C/111 Group Performance for the 64-pin Package (2/2) Function Timer A Performance 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 16-bit timer x 6 (1) Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer Asynchronous/synchronous serial interface x 6 channels * I2C-bus (UART0 to UART3, UART5) * Special mode 2 (UART0 to UART3, UART5) * IEBus (2) (optional (3)) (UART0 to UART3, UART5) 10-bit resolution x 20 channels Sample and hold functionality integrated 8-bit resolution x 1 CRC-CCITT (X16 + X12 + X5 + 1) 16 bits x 16 bits Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (2) mode (optional (3)) Programming and erasure supply voltage: VCC1 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming 50 MHz/VCC1 = 3.0 to 5.5 V -20C to 85C (version N) -40C to 85C (version D) 32 mA (VCC1 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) 64-pin plastic molded LQFP (PLQP0080KB-A)
Timer B
Three-phase motor control timer Serial Interface UART0 to UART3, UART5, UART8
A/D Converter D/A Converter CRC Calculator X-Y Converter Intelligent I/O
Flash Memory
Operating Frequency/Supply Voltage Operating Temperature Current Consumption Package
Notes: 1. Timer B4 is available in timer mode only. 2. IEBus is a trademark of NEC Electronics Corporation. 3. Please contact a Renesas sales office to use the optional feature.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 7 of 99
R32C/111 Group
1. Overview
1.2
Product Information
Table 1.7 lists the product information and Figure 1.1 shows the details of the part number. Table 1.7 R32C/111 Group Product List Package Code (1) ROM Capacity (2) RAM Capacity (P) (P) (P) (P) (P) (P) PLQP0100KB-A 256 Kbytes +8 Kbytes 384 Kbytes +8 Kbytes 512 Kbytes +8 Kbytes 384 Kbytes +8 Kbytes 63 Kbytes PTLG0100KA-A 512 Kbytes +8 Kbytes 256 Kbytes +8 Kbytes 128 Kbytes +8 Kbyts PLQP080KB-A 256 Kbytes +8 Kbyts 128 Kbytes +8 Kbyts PLQP064KB-A 256 Kbytes +8 Kbyts 32 Kbytes 32 Kbytes 32 Kbytes 40 Kbytes 256 Kbytes +8 Kbyts 384 Kbytes +8 Kbytes 512 Kbytes +8 Kbytes 63 Kbytes As of September, 2009 Remarks -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D)
Part Number R5F64110NFB R5F64110DFB R5F64111NFB R5F64111DFB R5F64112NFB R5F64112DFB R5F64114NFB R5F64114DFB R5F64115NFB R5F64115DFB R5F64116NFB R5F64116DFB R5F64111NLG R5F64111DLG R5F64112NLG R5F64112DLG R5F6411FNLG R5F6411FDLG R5F6411ENFP R5F6411EDFP R5F6411FNFP R5F6411FDFP R5F6411ENFN R5F6411EDFN R5F6411FNFN R5F6411FDFN (P) (P) (P) (P) (P) (P) (D) (P) (P) (P)
(D): Under development (P): On planning phase Notes: 1. The old package codes are as follows: PLQP0100KB-A: 100P6Q-A PTLG0100KA-A: 100F0M PLQP0080KB-A: 80P6Q-A PLQP0064KB-A: 64P6Q-A 2. Data flash memory provides an additional 8 Kbytes of ROM capacity.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 8 of 99
R32C/111 Group
1. Overview
Part Number R5 F 64 11 6 N XXX FB
Package Code FB : PLQP0100KB-A FP : PLQP0080KB-A FN : PLQP0064KB-A LG : PTLG0100KA-A ROM Number Omitted in the flash memory version Temperature Code N : -20C to 85C D : -40C to 85C ROM/RAM Capacity 0 : 256 KB/63 KB 1 : 384 KB/63 KB 2 : 512 KB/63 KB 4 : 256 KB/40 KB 5 : 384 KB/40 KB 6 : 512 KB/40 KB E : 128 KB/32 KB F : 256 KB/32 KB R32C/111 Group R32C/100 Series Memory Type F : Flash memory version
Figure 1.1
Part Numbering of Product
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 9 of 99
R32C/111 Group
1. Overview
1.3
Block Diagram
Figure 1.2 to Figure 1.4 show block diagram of the R32C/111 Group.
8
8
8
8
8
8
8
Port P0
Port P1
Port P2
Port P3
Port P4
Port P5
Port P6
VCC2 Peripheral functions Timer:
Timer A Timer B 16 bits x 5 timers 16 bits x 6 timers
VCC1
Port P7
8
A/D converter:
10 bits x 1 circuit Standard: 10 inputs Maximum: 26 inputs
Clock generator:
4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer
Port P8
7
Three-phase motor controller Serial interface:
9 channels
D/A converter:
8 bits x 2 channels
P8_5
DMAC Watchdog timer:
15 bits
VCC1
X-Y converter:
16 bits x 16 bits
DMAC II Memory ROM RAM Multiplier Floating-point unit
P9_1
CRC calculator (CCITT)
X16 + X12 + X5 + 1
R32C/100 Series CPU Core
R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB FLG INTB ISP USP PC SVF SVP VCT
Port P9
Intelligent I/O
Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1)
5
Port P10
8
Note: 1. IEBus is a trademark of NEC Electronics Corporation.
Figure 1.2
R32C/111 Group Block Diagram for the 100-pin Package
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 10 of 99
R32C/111 Group
1. Overview
8
8
8
8
8
8
Port P0
Port P1
Port P2
Port P3
Port P6
Port P7
Peripheral functions Timer:
Timer A Timer B 16 bits x 5 timers 16 bits x 6 timers
Port P8
A/D converter:
10 bits x 1 circuit Standard: 10 inputs Maximum: 26 inputs
Clock generator:
4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer
7
Three-phase motor controller X-Y converter:
16 bits x 16 bits
D/A converter:
8 bits x 1 channel
P8_5
DMAC Watchdog timer:
15 bits
Serial interface:
7 channels
DMAC II
Port P9
CRC calculator (CCITT)
X +X +X +1
16 12 5
R32C/100 Series CPU Core
R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB FLG INTB ISP USP PC SVF SVP VCT
Memory ROM RAM
4
Intelligent I/O
Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1)
Port P10
Multiplier Floating-point unit
8
Note: 1. IEBus is a trademark of NEC Electronics Corporation.
Figure 1.3
R32C/111 Group Block Diagram for the 80-pin Package
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 11 of 99
R32C/111 Group
1. Overview
4
3
8
4
8
8
Port P0
Port P1
Port P2
Port P3
Port P6
Port P7
Peripheral functions Timer:
Timer A Timer B 16 bits x 5 timers 16 bits x 6 timers
Port P8
A/D converter:
10 bits x 1 circuit Standard: 8 inputs Maximum: 20 inputs
Clock generator:
4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer
7
Three-phase motor controller X-Y converter:
16 bits x 16 bits
D/A converter:
8 bits x 1 channel
P8_5
DMAC Watchdog timer:
15 bits
Serial interface:
6 channels
DMAC II Memory ROM RAM
Port P10 P9_3
CRC calculator (CCITT)
X +X +X +1
16 12 5
R32C/100 Series CPU Core
R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB FLG INTB ISP USP PC SVF SVP VCT
Intelligent I/O
Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1)
Multiplier Floating-point unit
8
Note: 1. IEBus is a trademark of NEC Electronics Corporation.
Figure 1.4
R32C/111 Group Block Diagram for the 64-pin Package
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 12 of 99
R32C/111 Group
1. Overview
1.4
Pin Assignments
Figure 1.5 to Figure 1.8 show the pin assignments (top view) and Table 1.8 to Table 1.14 show the pin characteristics.
(Note 1)
P1_3 / D11 / IIO0_3 / IIO1_3 P1_4 / D12 / IIO0_4 / IIO1_4 P1_5 / D13 / INT3 / IIO0_5 / IIO1_5 P1_6 / D14 / INT4 / IIO0_6 / IIO1_6 P1_7 / D15 / INT5 / IIO0_7 / IIO1_7 P2_0 / A0 / [A0/D0] / BC0 / [BC0/D0] / AN2_0 P2_1 / A1 / [A1/D1] / AN2_1 P2_2 / A2 / [A2/D2] / AN2_2 P2_3 / A3 / [A3/D3] / AN2_3 P2_4 / A4 / [A4/D4] / AN2_4 P2_5 / A5 / [A5/D5] / AN2_5 P2_6 / A6 / [A6/D6] / AN2_6 P2_7 / A7 / [A7/D7] / AN2_7 VSS P3_0 / A8 / [A8/D8] / TA0OUT / UD0A / UD1A VCC2 P3_1 / A9 / [A9/D9] / TA3OUT / UD0B / UD1B P3_2 / A10 / [A10/D10] / TA1OUT / V P3_3 / A11 / [A11/D11] / TA1IN / V P3_4 / A12 / [A12/D12] / TA2OUT / W P3_5 / A13 / [A13/D13] / TA2IN / W P3_6 / A14 / [A14/D14] / TA4OUT / U P3_7 / A15 / [A15/D15] / TA4IN / U P4_0 / A16 / CTS3 / RTS3 / SS3 P4_1 / A17 / CLK3
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
IIO0_2 / IIO1_2 / D10 / P1_2 IIO0_1 / IIO1_1 / D9 / P1_1 IIO0_0 / IIO1_0 / D8 / P1_0 AN0_7 / D7 / P0_7 AN0_6 / D6 / P0_6 AN0_5 / D5 / P0_5 AN0_4 / D4 / P0_4 AN0_3 / D3 / P0_3 AN0_2 / D2 / P0_2 AN0_1 / D1 / P0_1 AN0_0 / D0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC STXD4 / SCL4 / RXD4 / ADTRG / P9_7 SRXD4 / SDA4 / TXD4 / ANEX1 / P9_6 CLK4 / ANEX0 / P9_5
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
50
VCC2
49 48 47 46 45 44 43
R32C/111 GROUP
PLQP0100KB-A (100P6Q-A) (Top view)
42 41 40 39 38 37 36 35 34 33 32 31 30 29
VCC1
1 2 3 4 5 6 7 8 9
28 27 26
P4_2 / A18 / RXD3 / SCL3 / STXD3 / ISRXD2 / IEIN P4_3 / A19 / TXD3 / SDA3 / SRXD3 / OUTC2_0 / ISTXD2 / IEOUT P4_4 / CS3 / A20 / CTS6 / RTS6 / SS6 P4_5 / CS2 / A21 / CLK6 P4_6 / CS1 / A22 / RXD6 / SCL6 / STXD6 P4_7 / CS0 / A23 / TXD6 / SDA6 / SRXD6 P5_0 / WR0 / WR P5_1 / WR1 / BC1 P5_2 / RD R5_3 / CLKOUT / BCLK P5_4 / HLDA / CS1 / TXD7 P5_5 / HOLD / CLK7 P5_6 / ALE / CS2 / RXD7 P5_7 / RDY / CS3 / CTS7 / RTS7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0 P6_3 / TXD0 / SDA0 / SRXD0 P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 2) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 2) P7_2 / TA1OUT / V / CLK2
(Note 3)
Notes: 1. Pin names in brackets [ ] represent a functional signal as a whole and should not be considered as two separate pins. 2. Pins P7_0 and P7_1 are open drain outputs. 3. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions".
Figure 1.5
Pin Assignment for the 100-pin Package (top view)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 13 of 99
SS4 / RTS4 / CTS4 / TB4IN / DA1 / P9_4 TB3IN / DA0 / P9_3 VDC0 P9_1 VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0 UD0B / UD1B / IIO1_4 / CLK5 / TA3IN / P7_7 UD0A / UD1A / IIO1_3 / RTS8 / CTS8 / TXD5 / SDA5 / SRXD5 / TA3OUT / P7_6 IIO1_2 / RXD8 / W / TA2IN / P7_5 IIO1_1 / CLK8 / W / TA2OUT / P7_4 IIO1_0 / TXD8 / SS2 / RTS2 / CTS2 / V / TA1IN / P7_3
R32C/111 Group
1. Overview
R32C/111 GROUP
PTLG0100KA-A (100F0M) (Top view)
VCC2 10 9 8 7 6 5 VCC1 4 3 2 1
K
P4_2
P4_3
P5_0
P5_1
P5_4
P6_0
P6_3
P6_6
P7_1 (Note 1)
P7_2
K
J
P4_1
P4_0
P4_6
P5_2
P5_5
P6_1
P6_4
P7_0 (Note 1)
P7_3
P7_4
J
H
P3_6
P3_7
P4_5
P5_3
P5_6
P6_2
P6_7
P7_5
P7_7
P8_0
H
G
P3_2
P3_3
P4_4
P4_7
P5_7
P6_5
P7_6
P8_3 / INT1
P8_5 / NMI
P8_2 / INT0
G
F
P3_0
VCC2
P3_1
P3_4
P3_5
P8_4 / INT2
P8_1
VSS
XIN
VCC1
F
E
P2_6
P2_7
VSS
P2_5
P1_6 / INT4
P0_0
P9_3
P8_6 / XCOUT
RESET
XOUT
E
D
P2_2
P2_1
P2_3
P2_4
P0_5
P10_7
P10_0
P9_1
CNVSS
P8_7 / XCIN
D
C
P2_0
P1_7 / INT5
P1_1
P1_0
P0_1
P10_3
AVSS
P9_7
VDC1
NSD
C
B
P1_4
P1_5 / INT3
P0_6
P0_4
P0_2
P10_5
P10_2
AVCC
P9_6
VDC0
B
A
P1_3
P1_2
P0_7
P0_3
P10_6
P10_4
P10_1
VREF
P9_5
P9_4
A
10
9
8 VCC2
7
6 VCC1
5
4
3
2
1
(Note 2)
Notes: 1. P7_0 and P7_1 as output are open drain outputs. 2. The pin position A1 varies by product. Refer to the index mark attached "Package Dimensions".
Figure 1.6
Pin Assignment for the 100-pin LGA Package (top view)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 14 of 99
R32C/111 Group
1. Overview
Table 1.8
Pin No. A1 E4 B1 D3 C2 C1 D2 D1 E3 E2 E1 F3 F2 F1 G2 F5 G3 G1 F4 H1 H2 G4 H3 J1 J2 K1 K2 J3 H4 K3 G5 J4 K4 H5 J5 K5 G6 H6 J6
Pin Characteristics for the 100-pin Package (1/3)
Port P9_4 P9_3 VDC0 P9_1 VDC1 NSD CNVSS XCIN RESET XOUT VSS XIN VCC1 P8_5 P8_4 P8_3 P8_2 P8_1 P8_0 P7_7 P7_6 P7_5 P7_4 P7_3 P7_2 P7_1 P7_0 P6_7 P6_6 P6_5 P6_4 P6_3 P6_2 P6_1 P6_0 P5_7 P5_6 P5_5 TB2IN TB1IN TB0IN NMI INT2 INT1 INT0 TA4IN/U TA3IN TA3OUT TA2IN/W TA1IN/V CTS5/RTS5/SS5 CLK5 IIO1_5/UD0B/UD1B IIO1_4/UD0B/UD1B TA4OUT/U RXD5/SCL5/STXD5 UD0A/UD1A TXD5/SDA5/ IIO1_3/UD0A/UD1A SRXD5/CTS8/RTS8 RXD8 CTS2/RTS2/SS2/ TXD8 IIO1_2 IIO1_1 IIO1_0 P8_7 XCOUT P8_6 Interrupt Pin Timer Pin TB4IN TB3IN UART Pin CTS4/RTS4/SS4 Intelligent I/O Pin Analog Pin DA1 DA0 Bus Control Pin
Control Pin QFP LGA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
TA2OUT/W CLK8
TA1OUT/V CLK2 TB5IN/ TA0IN TA0OUT RXD2/SCL2/STXD2 IIO1_7/OUTC2_2/ ISRXD2/IEIN TXD2/SDA2/SRXD2 IIO1_6/OUTC2_0/ ISTXD2/IEOUT TXD1/SDA1/SRXD1 RXD1/SCL1/STXD1 CLK1 CTS1/RTS1/SS1 TXD0/SDA0/SRXD0 RXD0/SCL0/STXD0 CLK0 CTS0/RTS0/SS0 CTS7/RTS7 RXD7 CLK7 RDY/CS3 ALE/CS2 HOLD OUTC2_1/ISCLK2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 15 of 99
R32C/111 Group
1. Overview
Table 1.9
Pin No. K6 H7 J7 K7 K8 G7 J8 H8 G8 K9 K10 J10 J9 H9 H10 F6 F7 G9 G10 F8 F9 F10 E8 E9 E10 E7 D7 D8 D10 D9 C10 C9 E6 B9 B10 A10 A9 C8 C7 A8
Pin Characteristics for the 100-pin Package (2/3)
Port P5_4 P5_3 P5_2 P5_1 P5_0 P4_7 P4_6 P4_5 P4_4 P4_3 P4_2 P4_1 P4_0 P3_7 P3_6 P3_5 P3_4 P3_3 P3_2 P3_1 VCC2 P3_0 VSS P2_7 P2_6 P2_5 P2_4 P2_3 P2_2 P2_1 P2_0 P1_7 P1_6 P1_5 P1_4 P1_3 P1_2 P1_1 P1_0 P0_7 INT5 INT4 INT3 IIO0_7/IIO1_7 IIO0_6/IIO1_6 IIO0_5/IIO1_5 IIO0_4/IIO1_4 IIO0_3/IIO1_3 IIO0_2/IIO1_2 IIO0_1/IIO1_1 IIO0_0/IIO1_0 AN0_7 AN2_7 AN2_6 AN2_5 AN2_4 AN2_3 AN2_2 AN2_1 AN2_0 A7(/D7) A6(/D6) A5(/D5) A4(/D4) A3(/D3) A2(/D2) A1(/D1) A0(/D0)/ BC0(/D0) D15 D14 D13 D12 D11 D10 D9 D8 D7 TA0OUT UD0A/UD1A A8(/D8) TA4IN/U TA4OUT/U TA2IN/W TA2OUT/W TA1IN/V TA1OUT/V TA3OUT UD0B/UD1B TXD6/SDA6/SRXD6 RXD6/SCL6/STXD6 CLK6 CTS6/RTS6/SS6 TXD3/SDA3/SRXD3 OUTC2_0/ISTXD2/ IEOUT RXD3/SCL3/STXD3 ISRXD2/IEIN CLK3 CTS3/RTS3/SS3 Interrupt Pin Timer Pin UART Pin TXD7 Intelligent I/O Pin Analog Pin Bus Control Pin HLDA/CS1 CLKOUT/ BCLK RD WR1/BC1 WR0/WR CS0/A23 CS1/A22 CS2/A21 CS3/A20 A19 A18 A17 A16 A15(/D15) A14(/D14) A13(/D13) A12(/D12) A11(/D11) A10(/D10) A9(/D9)
Control Pin QFP LGA 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 16 of 99
R32C/111 Group
1. Overview
Table 1.10
Pin No. B8 D6 B7 A7 B6 C6 E5 D5 A6 B5 A5 C5 B4 A4 C4 D4 A3 B3 C3 B2
Pin Characteristics for the 100-pin Package (3/3)
Port P0_6 P0_5 P0_4 P0_3 P0_2 P0_1 P0_0 P10_7 KI3 P10_6 KI2 P10_5 KI1 P10_4 KI0 P10_3 P10_2 P10_1 Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin AN0_6 AN0_5 AN0_4 AN0_3 AN0_2 AN0_1 AN0_0 AN_7 AN_6 AN_5 AN_4 AN_3 AN_2 AN_1 AN_0 Bus Control Pin D6 D5 D4 D3 D2 D1 D0
Control Pin QFP LGA 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
AVSS P10_0 VREF AVCC P9_7 P9_6 P9_5 RXD4/SCL4/STXD4 TXD4/SDA4/SRXD4 CLK4 ADTRG ANEX1 ANEX0
100 A2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 17 of 99
R32C/111 Group
1. Overview
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
P0_7 / AN0_7 P1_0 / IIO0_0 / IIO1_0 P1_1 / IIO0_1 / IIO1_1 P1_2 / IIO0_2 / IIO1_2 P1_3 / IIO0_3 / IIO1_3 P1_4 / IIO0_4 / IIO1_4 P1_5 / INT3 / IIO0_5 / IIO1_5 / ADTRG P1_6 / INT4 / IIO0_6 / IIO1_6 P1_7 / INT5 / IIO0_7 / IIO1_7 P2_0 / AN2_0 / IIO0_0 P2_1 / AN2_1 / IIO0_1 P2_2 / AN2_2 / IIO0_2 P2_3 / AN2_3 / IIO0_3 P2_4 / AN2_4 / IIO0_4 P2_5 / AN2_5 / IIO0_5 P2_6 / AN2_6 / IIO0_6 P2_7 / AN2_7 / IIO0_7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0
AN0_6 / P0_6 AN0_5 / P0_5 AN0_4 / P0_4 AN0_3 / P0_3 AN0_2 / P0_2 AN0_1 / P0_1 AN0_0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC STXD4 / SCL4 / RXD4 / ADTRG / P9_7 SRXD4 / SDA4 / TXD4 / ANEX1 / P9_6
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20
40 39 38 37 36 35 34
R32C/111 GROUP
PLQP0080KB-A (80P6Q-A) (Top view)
33 32 31 30 29 28 27 26 25 24 23 22 21
P6_3 / TXD0 / SDA0 / SRXD0 P3_0 / TA0OUT / UD0A / UD1A / CLK3 P3_1 / TA3OUT / UD0B / UD1B / RXD3 / SCL3 / STXD3 P3_2 / TA1OUT / V / TXD3 / SDA3 / SRXD3 P3_3 / TA1IN / V / CTS3 / RTS3 / SS3 P3_4 / TA2OUT / W P3_5 / TA2IN / W P3_6 / TA4OUT / U P3_7 / TA4IN / U P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 1) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 1) P7_2 / TA1OUT / V / CLK2 P7_3 / TA1IN / V / CTS2 / RTS2 / SS2 / TXD8 / IIO1_0 P7_4 / TA2OUT / W / CLK8 / IIO1_1 P7_5 / TA2IN / W / RXD8 / IIO1_2 P7_6 / TA3OUT / TXD5 / SDA5 / SRXD5 / RTS8 / CTS8 / IIO1_3 / UD0A / UD1A
(Note 2)
1
2
3
4
5
6
7
8
Notes: 1. Pins P7_0 and P7_1 are open drain outputs. 2. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions".
Figure 1.7
Pin Assignment for the 80-pin Package (top view)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 18 of 99
CLK4 / ANEX0 / P9_5 TB3IN / DA0 / P9_3 VDC0 VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0 UD0B / UD1B / IIO1_4 / CLK5 / TA3IN / P7_7
9
R32C/111 Group
1. Overview
Table 1.11
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VDC0 VDC1 NSD
Pin Characteristics for the 80-pin Package (1/2)
Port P9_5 P9_3 TB3IN Interrupt Pin Timer Pin CLK4 UART Pin Intelligent I/O Pin Analog Pin ANEX0 DA0
Pin No. Control Pin
CNVSS XCIN XCOUT RESET XOUT VSS XIN VCC1 P8_5 P8_4 P8_3 P8_2 P8_1 P8_0 P7_7 P7_6 P7_5 P7_4 P7_3 P7_2 P7_1 P7_0 P6_7 P6_6 P6_5 P6_4 P3_7 P3_6 P3_5 P3_4 P3_3 P3_2 P3_1 P3_0 P6_3 TA4IN/U TA4OUT/U TA2IN/W TA2OUT/W TA1IN/V TA1OUT/V TA3OUT TA0OUT CTS3/RTS3/SS3 TXD3/SDA3/SRXD3 RXD3/SCL3/STXD3 CLK3 TXD0/SDA0/SRXD0 UD0B/UD1B UD0A/UD1A NMI INT2 INT1 INT0 TA4IN/U TA4OUT/U TA3IN TA3OUT TA2IN/W TA2OUT/W TA1IN/V TA1OUT/V CTS5/RTS5/SS5 RXD5/SCL5/STXD5 CLK5 TXD5/SDA5/SRXD5/ CTS8/RTS8 RXD8 CLK8 CLK2 IIO1_7/OUTC2_2/ ISRXD2/IEIN IIO1_6/OUTC2_0/ ISTXD2/IEOUT IIO1_5/UD0B/UD1B UD0A/UD1A IIO1_4/UD0B/UD1B IIO1_3/UD0A/UD1A IIO1_2 IIO1_1 P8_7 P8_6
CTS2/RTS2/SS2/TXD8 IIO1_0
TB5IN/TA0IN RXD2/SCL2/STXD2 TA0OUT TXD2/SDA2/SRXD2 TXD1/SDA1/SRXD1 RXD1/SCL1/STXD1 CLK1 CTS1/RTS1/SS1
OUTC2_1/ISCLK2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 19 of 99
R32C/111 Group
1. Overview
Table 1.12
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 VREF AVCC AVSS
Pin Characteristics for the 80-pin Package (2/2)
Port P6_2 P6_1 P6_0 P2_7 P2_6 P2_5 P2_4 P2_3 P2_2 P2_1 P2_0 P1_7 P1_6 P1_5 P1_4 P1_3 P1_2 P1_1 P1_0 P0_7 P0_6 P0_5 P0_4 P0_3 P0_2 P0_1 P0_0 P10_7 KI3 P10_6 KI2 P10_5 KI1 P10_4 KI0 P10_3 P10_2 P10_1 P10_0 INT5 INT4 INT3 Interrupt Pin Timer Pin TB2IN TB1IN TB0IN CLK0 CTS0/RTS0/SS0 IIO0_7 IIO0_6 IIO0_5 IIO0_4 IIO0_3 IIO0_2 IIO0_1 IIO0_0 IIO0_7/IIO1_7 IIO0_6/IIO1_6 IIO0_5/IIO1_5 IIO0_4/IIO1_4 IIO0_3/IIO1_3 IIO0_2/IIO1_2 IIO0_1/IIO1_1 IIO0_0/IIO1_0 AN0_7 AN0_6 AN0_5 AN0_4 AN0_3 AN0_2 AN0_1 AN0_0 AN_7 AN_6 AN_5 AN_4 AN_3 AN_2 AN_1 AN_0 ADTRG AN2_7 AN2_6 AN2_5 AN2_4 AN2_3 AN2_2 AN2_1 AN2_0 UART Pin RXD0/SCL0/STXD0 Intelligent I/O Pin Analog Pin
Pin No. Control Pin
P9_7 P9_6
RXD4/SCL4/STXD4 TXD4/SDA4/SRXD4
ADTRG ANEX1
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 20 of 99
R32C/111 Group
1. Overview
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
AN0_2 / P0_2 AN0_1 / P0_1 AN0_0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC TB3IN / DA0 / P9_3 VDC0
33
P0_3 / AN0_3 P1_5 / INT3 / IIO0_5 / IIO1_5 / ADTRG P1_6 / INT4 / IIO0_6 / IIO1_6 P1_7 / INT5 / IIO0_7 / IIO1_7 P2_0 / AN2_0 / IIO0_0 P2_1 / AN2_1 / IIO0_1 P2_2 / AN2_2 / IIO0_2 P2_3 / AN2_3 / IIO0_3 P2_4 / AN2_4 / IIO0_4 P2_5 / AN2_5 / IIO0_5 P2_6 / AN2_6 / IIO0_6 P2_7 / AN2_7 / IIO0_7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0 P6_3 / TXD0 / SDA0 / SRXD0
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 10 11 12 13 14 15 16
32 31 30 29
R32C/111 GROUP
PLQP0064KB-A (64P6Q-A) (Top view)
28 27 26 25 24 23 22 21 20 19 18 17
P3_0 / TA0OUT / UD0A / UD1A / CLK3 P3_1 / TA3OUT / UD0B / UD1B / RXD3 / SCL3 / STXD3 P3_2 / TA1OUT / V / TXD3 / SDA3 / SRXD3 P3_3 / TA1IN / V / CTS3 / RTS3 / SS3 P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 1) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 1) P7_2 / TA1OUT / V / CLK2 P7_3 / TA1IN / V / CTS2 / RTS2 / SS2 / TXD8 / IIO1_0 P7_4 / TA2OUT / W / CLK8 / IIO1_1 P7_5 / TA2IN / W / RXD8 / IIO1_2 P7_6 / TA3OUT / TXD5 / SDA5 / SRXD5 / RTS8 / CTS8 / IIO1_3 / UD0A / UD1A P7_7 / TA3IN / CLK5 / IIO1_4 / UD0B / UD1B
(Note 2)
1
2
3
4
5
6
7
8
Notes: 1. P7_0 and P7_1 are open drain outputs. 2. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions".
Figure 1.8
Pin Assignment for the 64-pin Package (top view)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 21 of 99
VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0
9
R32C/111 Group
1. Overview
Table 1.13
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VDC1 NSD
Pin Characteristics for the 64-pin Package (1/2)
Port Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin
Pin No. Control Pin
CNVSS XCIN XCOUT RESET XOUT VSS XIN VCC1 P8_5 P8_4 P8_3 P8_2 P8_1 P8_0 P7_7 P7_6 P7_5 P7_4 P7_3 P7_2 P7_1 P7_0 P6_7 P6_6 P6_5 P6_4 P3_3 P3_2 P3_1 P3_0 P6_3 P6_2 P6_1 P6_0 P2_7 P2_6 P2_5 P2_4 TB2IN TB1IN TB0IN TA1IN/V TA1OUT/V TA3OUT TA0OUT NMI INT2 INT1 INT0 TA4IN/U TA4OUT/U TA3IN TA3OUT TA2IN/W TA2OUT/W TA1IN/V TA1OUT/V TB5IN/ TA0IN TA0OUT CTS5/RTS5/SS5 RXD5/SCL5/STXD5 CLK5 TXD5/SDA5/SRXD5/ CTS8/RTS8 RXD8 CLK8 CLK2 RXD2/SCL2/STXD2 TXD2/SDA2/SRXD2 TXD1/SDA1/SRXD1 RXD1/SCL1/STXD1 CLK1 CTS1/RTS1/SS1 CTS3/RTS3/SS3 TXD3/SDA3/SRXD3 RXD3/SCL3/STXD3 CLK3 TXD0/SDA0/SRXD0 RXD0/SCL0/STXD0 CLK0 CTS0/RTS0/SS0 IIO0_7 IIO0_6 IIO0_5 IIO0_4 AN2_7 AN2_6 AN2_5 AN2_4 UD0B/UD1B UD0A/UD1A OUTC2_1/ISCLK2 IIO1_7/OUTC2_2/ ISRXD2/IEIN IIO1_6/OUTC2_0/ ISTXD2/IEOUT IIO1_5/UD0B/UD1B UD0A/UD1A IIO1_4/UD0B/UD1B IIO1_3/UD0A/UD1A IIO1_2 IIO1_1 P8_7 P8_6
CTS2/RTS2/SS2/TXD8 IIO1_0
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 22 of 99
R32C/111 Group
1. Overview
Table 1.14
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 VDC0 VREF AVCC AVSS
Pin Characteristics for the 64-pin Package (2/2)
Port P2_3 P2_2 P2_1 P2_0 P1_7 P1_6 P1_5 P0_3 P0_2 P0_1 P0_0 P10_7 KI3 P10_6 KI2 P10_5 KI1 P10_4 KI0 P10_3 P10_2 P10_1 P10_0 INT5 INT4 INT3 Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin IIO0_3 IIO0_2 IIO0_1 IIO0_0 IIO0_7/IIO1_7 IIO0_6/IIO1_6 IIO0_5/IIO1_5 ADTRG AN0_3 AN0_2 AN0_1 AN0_0 AN_7 AN_6 AN_5 AN_4 AN_3 AN_2 AN_1 AN_0 Analog Pin AN2_3 AN2_2 AN2_1 AN2_0
Pin No. Control Pin
P9_3
TB3IN
DA0
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 23 of 99
R32C/111 Group
1. Overview
1.5
Pin Definitions and Functions
Table 1.15 to Table 1.21 show the pin definitions and functions.
Table 1.15 Pin Definitions and Functions for the 100-pin Package (1/4)
Function Power supply Connecting pins for decoupling capacitor Analog power supply Reset input CNVSS Debug port
Symbol VCC1, VCC2, VSS VDC0, VDC1
I/O I
Power Supply --
Description Applicable as follows: VCC1 and VCC2 = 3.0 to 5.5 V (VCC1 VCC2), VSS = 0 V A decoupling capacitor for internal voltage should be connected between VDC0 and VDC1 Power supply for the A/D converter. AVCC and AVSS should be connected to VCC1 and VSS, respectively The MCU is reset when this pin is driven low This pin should be connected to VSS via a resistor This pin is to communicate with a debugger. It should be connected to VCC1 via a resistor of 1 to 4.7 k Input/output for the main clock oscillator. A crystal, or a ceramic resonator should be connected between pins XIN and XOUT. An external clock should be input at the XIN while leaving the XOUT open Input/output for the sub clock oscillator. A crystal oscillator should be connected between pins XCIN and XCOUT. An external clock should be input at the XCIN while leaving the XCOUT open BCLK output Output of the clock with the same frequency as fC, f8, or f32 Input for external interrupts Input for NMI Input for the key input interrupt Input/output of data (D0 to D7) while accessing an external memory space with a separate bus Input/output of data (D8 to D15) while accessing an external memory space with 16-bit separate bus Output of address bits A0 to A23
-- AVCC, AVSS I
RESET
--
VCC1 VCC1 VCC1 VCC1
I I I/O
CNVSS NSD
Main clock input
XIN
I O
VCC1 VCC1 VCC1 VCC1 VCC2 VCC2 VCC1 VCC2 VCC1 VCC1 VCC2
Main clock output XOUT
Sub clock input Sub clock output BCLK output Clock output
XCIN XCOUT BCLK CLKOUT
I O O O I I I I/O
External interrupt INT0 to INT5 input NMI input Bus control pins P8_5/NMI D0 to D7 D8 to D15 Key input interrupt KI0 to KI3
I/O A0 to A23 O
VCC2 VCC2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 24 of 99
R32C/111 Group
1. Overview
Table 1.16
Pin Definitions and Functions for the 100-pin Package (2/4)
Function Bus control pins
Symbol A0/D0 to A7/D7
I/O
Power Supply VCC2
Description Output of address bits (A0 to A7) and input/output of data (D0 to D7) by time-division while accessing an external memory space with multiplexed bus Output of address bits (A8 to A15) and input/ output of data (D8 to D15) by time-division while accessing an external memory space with 16-bit multiplexed bus Output of byte control (BC0) and input/output of data (D0) by time-division while accessing an external memory space with multiplexed bus Chip select output Output of write, byte control, and read signals. Either WRx or WR and BCx can be selected by a program. Data is read when RD is low. * When WR0, WR1, and RD are selected, data is written to the following address: an even address, when WR0 is low an odd address, when WR1 is low on 16-bit external data bus * When WR, BC0, BC1, and RD are selected, data is written, when WR is low and the following address is accessed: an even address, when BC0 is low an odd address, when BC1 is low on 16-bit external data bus
I/O A8/D8 to A15/D15
I/O
VCC2
BC0/D0
I/O
CS0 to CS3 WR0/WR1/WR/ BC0/BC1/RD
VCC2 VCC2
O
O
VCC2
ALE
HOLD HLDA RDY
O I O I
VCC2 VCC2 VCC2 VCC2
Latch enable signal in multiplexed bus format The MCU is in a hold state while this pin is held low This pin is driven low while the MCU is held in a hold state Bus cycle is extended by the CPU if this pin is low on the falling edge of the BCLK
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 25 of 99
R32C/111 Group
1. Overview
Table 1.17
Pin Definitions and Functions for the 100-pin Package (3/4)
Function I/O port
Symbol P0_0 to P0_7 P1_0 to P1_7 P2_0 to P2_7 P3_0 to P3_7 P4_0 to P4_7 P5_0 to P5_7 P6_0 to P6_7 P7_0 to P7_7 P8_0 to P8_4 P8_6, P8_7 P9_3 to P9_7 P10_0 to P10_7
I/O
Power Supply
Description I/O ports in CMOS. Each port can be programmed to input or output under the control of the direction register. Pull-up resistors are selected for following 4-pin units, but are enabled only for the input pins: Pi_0 to Pi_3 and Pi_4 to Pi_7 (i = 0 to 10). P7_0 and P7_1 outputs are N-channel open drain
I/O
VCC2
I/O
VCC1
Input port Timer A
P9_1 TA0OUT to TA4OUT TA0IN to TA4IN
I
VCC1 VCC1 VCC2 VCC1 VCC2 VCC1 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2
Input port in CMOS. Pull-up resistors are selectable for P9_1 and P9_3 Timers A0 to A4 input/output. TA0OUT output assigned for port P7_0 is Nchannel open drain Timers A0 to A4 input Timers B0 to B5 input Three-phase motor control timer output
I/O
I I
Timer B Three-phase motor control timer output Serial interface
TB0IN to TB5IN U,U,V,V,W,W
O
CTS0 to CTS8 RTS0 to RTS8
I O I/O I O I/O I/O
Handshake input Handshake output Transmit/receive clock input/output Serial data input Serial data output. TXD2 output is N-channel open drain Serial data input/output. SDA2 output is N-channel open drain Transmit/receive clock input/output. SCL2 output is N-channel open drain
CLK0 to CLK8 RXD0 to RXD8 TXD0 to TXD8 I2C bus (simplified) SDA0 to SDA6 SCL0 to SCL6
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 26 of 99
R32C/111 Group
1. Overview
Table 1.18
Pin Definitions and Functions for the 100-pin Package (4/4)
Function Serial interface special functions
Symbol STXD0 to STXD6 SRXD0 to SRXD6
SS0 to SS6
I/O O I I I
Power Supply VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1
Description Serial data output in slave mode. STXD2 is N-channel open drain Serial data input in slave mode Input to control serial interface special functions Analog input for the A/D converter
A/D converter
AN_0 to AN_7 AN0_0 to AN0_7 AN2_0 to AN2_7
ADTRG
I
VCC2
I I/O I O I I/O
VCC1 VCC1 VCC1 VCC1
-
External trigger input for the A/D converter Expanded analog input for the A/D converter and output in external op-amp connection mode Expanded analog input for the A/D converter Output for the D/A converter Reference voltage input for the A/D converter and D/A converter Input/output for the Intelligent I/O group 0. Either input capture or output compare is selectable Input/output for the Intelligent I/O group 1. Either input capture or output compare is selectable. IIO1_6 and IIO1_7 outputs assigned for ports P7_0 and P7_1 are N-channel open drain Input for the two-phase encoder Output for OC (output compare) of the Intelligent I/ O group 2. OUTC2_0 and OUTC2_2 assigned for ports P7_0 and P7_1 are N-channel open drain Clock input/output for the serial interface Receive data input for the serial interface Transmit data output for the serial interface. ISTXD2 assigned for port P7_0 is N-channel open drain Receive data input for the serial interface Transmit data output for the serial interface. IEOUT assigned for port P7_0 is N-channel open drain
ANEX0 ANEX1 D/A converter DA0, DA1 Reference voltage VREF input Intelligent I/O IIO0_0 to IIO0_7 IIO1_0 to IIO1_7
VCC1 VCC2 VCC1 VCC2 VCC1 VCC2 VCC1 VCC2
I/O
UD0A, UD0B, UD1A, UD1B OUTC2_0 to OUTC2_2
I
O
ISCLK2 ISRXD2 ISTXD2
I/O I O VCC1 VCC2
IEIN IEOUT
I O VCC1 VCC2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 27 of 99
R32C/111 Group
1. Overview
Table 1.19
Pin Definitions and Functions for the 80-/64-pin Package (1/3)
Function Power supply Connecting pins for decoupling capacitor Analog power supply Reset input CNVSS Debug port Main clock input
Symbol VCC1, VSS VDC0, VDC1
I/O I --
Description Applicable as follows: VCC1 = 3.0 to 5.5 V, VSS = 0 V A decoupling capacitor for internal voltage should be connected between VDC0 and VDC1 Power supply for the A/D converter. AVCC and AVSS should be connected to VCC and VSS, respectively The MCU is reset when this pin is driven low This pin should be connected to VSS via a resistor This pin is to communicate with a debugger. It should be connected to VCC1 via a resistor of 1 to 4.7 k Input/output for the main clock oscillator. A crystal, or a ceramic resonator should be connected between pins XIN and XOUT. An external clock should be input at the XIN while leaving the XOUT open Input/output for the sub clock oscillator. A crystal oscillator should be connected between pins XCIN and XCOUT. An external clock should be input at the XCIN while leaving the XCOUT open Input for external interrupts Input for NMI Input for the key input interrupt I/O ports in CMOS. Each port can be programmed to input or output under the control of the direction register. Pull-up resistors are selected for following 4-pin units, but are enabled only for the input pins: Pi_0 to Pi_3 and Pi_4 to Pi_7 (i = 0 to 3, 6 to 10). P7_0 and P7_1 outputs are N-channel open drain
AVCC, AVSS
RESET
I I I I/O I O I O I I I
CNVSS NSD XIN
Main clock output XOUT Sub clock input Sub clock output XCIN XCOUT
External interrupt INT0 to INT5 input NMI input I/O port
(1)
P8_5/NMI P0_0 to P0_7 P1_0 to P1_7 P2_0 to P2_7 P3_0 to P3_7 P6_0 to P6_7 P7_0 to P7_7 P8_0 to P8_4 P8_6, P8_7 P9_3, P9_5 to P9_7, P10_0 to P10_7 TA0OUT to TA4OUT TA0IN to TA4IN
Key input interrupt KI0 to KI3
I/O
Timer A
I/O I I
Timers A0 to A4 input/output. TA0OUT output assigned for port P7_0 is N-channel open drain Timers A0 to A4 input Timers B0 to B3, and B5 input Three-phase motor control timer output
Timer B Three-phase motor control timer output
TB0IN to TB3IN, TB5IN U,U,V,V,W,W
O
Note: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 80-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 28 of 99
R32C/111 Group
1. Overview
Table 1.20
Pin Definitions and Functions for the 80-/64-pin Package (2/3)
Function
Symbol
I/O I O I/O I O I/O I/O O I I I I I/O I O I Handshake input Handshake output
Description
Serial interface (1) CTS0 to CTS3, CTS5, CTS8
RTS0 to RTS3, RTS5, RTS8
CLK0 to CLK5, CLK8 RXD0 to RXD5, RXD8 TXD0 to TXD5, TXD8 I2C bus (simplified) (1) SDA0 to SDA5 SCL0 to SCL5 Serial interface special functions
(1)
Transmit/receive clock input/output Serial data input Serial data output. TXD2 output is N-channel open drain Serial data input/output. SDA2 output is N-channel open drain Transmit/receive clock input/output. SCL2 output is N-channel open drain Serial data output in slave mode. STXD2 is N-channel open drain Serial data input in slave mode Input to control serial interface special functions Analog input for the A/D converter
STXD0 to STXD5 SRXD0 to SRXD5
SS0 to SS3, SS5
A/D converter (2)
AN_0 to AN_7 AN0_0 to AN0_7 AN2_0 to AN2_7
ADTRG
External trigger input for the A/D converter Expanded analog input for the A/D converter and output in external op-amp connection mode Expanded analog input for the A/D converter Output for the D/A converter Reference voltage input for the A/D converter and D/A converter
ANEX0 ANEX1 D/A converter DA0 Reference voltage VREF input
Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, SRXD4, and STXD4 are available in the 80-pin package only. 2. Pins AN0_4 to AN0_7, ANEX0 and ANEX1 are available in the 80-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 29 of 99
R32C/111 Group
1. Overview
Table 1.21
Pin Definitions and Functions for the 80-/64-pin Package (3/3)
Function Intelligent I/O
Symbol IIO0_0 to IIO0_7 IIO1_0 to IIO1_7
I/O I/O
Description Input/output for the Intelligent I/O group 0. Either input capture or output compare is selectable Input/output for the Intelligent I/O group 1. Either input capture or output compare is selectable. IIO1_6 and IIO1_7 outputs assigned for ports P7_0 and P7_1 are N-channel open drain Input for the two-phase encoder Output for OC (output compare) of the Intelligent I/O group 2. OUTC2_0 and OUTC2_2 assigned for ports P7_0 and P7_1 are N-channel open drain Clock input/output for the serial interface Receive data input for the serial interface Transmit data output for the serial interface. ISTXD2 assigned for port P7_0 is N-channel open drain Receive data input for the serial interface Transmit data output for the serial interface. IEOUT assigned for port P7_0 is N-channel open drain
I/O
UD0A, UD0B, UD1A, UD1B OUTC2_0 to OUTC2_2
I
O
ISCLK2 ISRXD2 ISTXD2 IEIN IEOUT
I/O I O I O
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 30 of 99
R32C/111 Group
2. Central Processing Unit (CPU)
2.
Central Processing Unit (CPU)
The CPU contains registers as shown below. There are two register banks each consisting of registers R2R0, R3R1, R6R4, R7R5, A0 to A3, SB, and FB.
General purpose registers R2R0 R3R1 R6R4 R7R5
b31
b23
b15
b7
b0
R2H R3H R6 R7
R2L R3L
R0H R1H R4 R5 A0 A1 A2 A3 SB FB USP ISP
R0L R1L Data registers (1)
Address registers (1)
Static base register (1) Frame base register (1) User stack pointer Interrupt stack pointer Interrupt vector table base register Program counter Flag register
INTB PC FLG
b31
b24 b23
b16 b15
b8 b7
b0
RND DP
IPL FU FO
U I OBSZDC
Blank fields represent reserved.
Fast interrupt registers
b31
b0
SVF SVP VCT
Save flag register Save PC register Vector register
b0
DMAC-associated registers (2)
b31
b23
DMD0 DMD0 DMD0 DMD0 DCT0 DCT0 DCT0 DCT0 DCR0 DCR0 DCR0 DCR0 DSA0 DSA0 DSA0 DSA0 DSR0 DSR0 DSR0 DSR0 DDA0 DDA0 DDA0 DDA0 DDR0 DDR0 DDR0 DDR0
DMA mode register DMA terminal count register DMA terminal count reload register DMA source address register DMA source address reload register DMA destination address register DMA destination address reload register
Notes: 1. There are two banks of these registers. 2. There are four identical sets of DMAC-associated registers.
Figure 2.1
CPU Registers
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 31 of 99
R32C/111 Group
2. Central Processing Unit (CPU)
2.1 2.1.1
General Purpose Registers Data Registers (R2R0, R3R1, R6R4, and R7R5)
These 32-bit registers are primarily used for transfers and arithmetic/logic operations. Each of the registers can be divided into upper and lower 16-bit registers, e.g. R2R0 can be divided into R2 and R0, R3R0 can be divided into R3 and R1, etc. Moreover, data registers R2R0 and R3R1 can be divided into four 8-bit data registers: upper (R2H and R3H), mid-upper (R2L and R3L), mid-lower (R0H and R1H), and lower (R0L and R1L).
2.1.2
Address Registers (A0, A1, A2, and A3)
These 32-bit registers have functions similar to data registers. They are also used for address register indirect addressing and address register relative addressing.
2.1.3
Static Base Register (SB)
This 32-bit register is used for SB relative addressing.
2.1.4
Frame Base Register (FB)
This 32-bit register is used for FB relative addressing.
2.1.5
Program Counter (PC)
This 32-bit counter indicates the address of the instruction to be executed next.
2.1.6
Interrupt Vector Table Base Register (INTB)
This 32-bit register indicates the start address of a relocatable vector table.
2.1.7
User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)
Two types of 32-bit stack pointers (SPs) are provided: user stack pointer (USP) and interrupt stack pointer (ISP). Use the stack pointer select flag (U flag) to select either the user stack pointer (USP) or the interrupt stack pointer (ISP). The U flag is bit 7 in the flag register (FLG). Refer to 2.1.8 "Flag Register (FLG)" for details. To minimize the overhead of interrupt sequence due to less memory access, set the user stack pointer (USP) or the interrupt stack pointer (ISP) to a multiple of 4.
2.1.8
Flag Register (FLG)
This 32-bit register indicates the CPU status.
2.1.8.1
Carry Flag (C flag)
This flag becomes 1 when any of the carry, borrow, shifted-out bit, etc. is generated in the arithmetic logic unit (ALU).
2.1.8.2
Debug Flag (D flag)
This flag is only for debugging. Only set this bit to 0.
2.1.8.3
Zero Flag (Z flag)
This flag becomes 1 when the result of an operation is 0; otherwise it is 0.
2.1.8.4
Sign Flag (S flag)
This flag becomes 1 when the result of an operation is a negative value; otherwise it is 0. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 32 of 99
R32C/111 Group
2. Central Processing Unit (CPU)
2.1.8.5
Register Bank Select Flag (B flag)
This flag selects a register bank. It indicates 0 when the register bank 0 is selected, and 1 when the register bank 1 is selected.
2.1.8.6
Overflow Flag (O flag)
This flag becomes 1 if an overflow occurs in an operation; otherwise it is 0.
2.1.8.7
Interrupt Enable Flag (I flag)
This flag enables maskable interrupts. To disable maskable interrupts, set this flag to 0. To enable them, set this flag to 1. When an interrupt is accepted, the flag becomes 0.
2.1.8.8
Stack Pointer Select Flag (U flag)
To select the interrupt stack pointer (ISP), set this flag to 0. To select the user stack pointer (USP), set this flag to 1. It becomes 0 when a hardware interrupts is accepted or when an INT instruction designated by a software interrupt number from 0 to 127 is executed.
2.1.8.9
Floating-point Underflow Flag (FU flag)
This flag becomes 1 when an underflow occurs in a floating-point operation; otherwise it is 0. It also becomes 1 when the operand has invalid numbers (subnormal numbers).
2.1.8.10
Floating-point Overflow Flag (FO flag)
This flag becomes 1 when an overflow occurs in a floating-point operation; otherwise it is 0. It also becomes 1 when the operand has invalid numbers (subnormal numbers).
2.1.8.11
Processor Interrupt Priority Level (IPL)
The processor interrupt priority level (IPL), consisting of three bits, selects a processor interrupt priority level from level 0 to 7. An interrupt is acceptable when the interrupt request level is higher than the selected IPL. When the processor interrupt priority level (IPL) is set to 111b (level 7), all interrupts are disabled.
2.1.8.12
Fixed-point Radix Point Designation Bit (DP bit)
This bit designates the radix point. It also specifies which portion of the fixed-point multiplication result to take. It is used in the MULX instruction.
2.1.8.13
Floating-point Rounding Mode (RND)
The 2-bit floating-point rounding mode selects a rounding mode for floating-point calculation results.
2.1.8.14
Reserved
Only set this bit to 0. The read value is undefined.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 33 of 99
R32C/111 Group
2. Central Processing Unit (CPU)
2.2
Fast Interrupt Registers
The following three registers are provided to minimize the overhead of interrupt sequence.
2.2.1
Save Flag Register (SVF)
This 32-bit register is used to save the flag register when a fast interrupt is generated.
2.2.2
Save PC Register (SVP)
This 32-bit register is used to save the program counter when a fast interrupt is generated.
2.2.3
Vector Register (VCT)
This 32-bit register is used to indicate a jump address when a fast interrupt is generated.
2.3
DMAC-associated Registers
There are seven types of DMAC-associated registers.
2.3.1
DMA Mode Registers (DMD0, DMD1, DMD2, and DMD3)
These 32-bit registers are used to set DMA transfer mode, bit rate etc.
2.3.2
DMA Terminal Count Registers (DCT0, DCT1, DCT2, and DCT3)
These 24-bit registers are used to set DMA transfer counting.
2.3.3
DMA Terminal Count Reload Registers (DCR0, DCR1, DCR2, and DCR3)
These 24-bit registers are used to set the reloaded values for DMA terminal count registers.
2.3.4
DMA Source Address Registers (DSA0, DSA1, DSA2, and DSA3)
These 32-bit registers are used to set DMA source addresses.
2.3.5
DMA Source Address Reload Registers (DSR0, DSR1, DSR2, and DSR3)
These 32-bit registers are used to set the reloaded value for DMA source address register.
2.3.6
DMA Destination Address Registers (DDA0, DDA1, DDA2, and DDA3)
These 32-bit registers are used to set DMA destination address.
2.3.7
DMA Destination Address Reload Registers (DDR0, DDR1, DDR2, and DDR3)
These 32-bit registers are used to set reloaded values for DMA destination address registers.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 34 of 99
R32C/111 Group
3. Memory
3.
Memory
Figure 3.1 shows the memory map of the R32C/111 Group. The R32C/111 Group provides a 4-Gbyte address space from 00000000h to FFFFFFFFh. The internal ROM is mapped to the end of the memory map with the ending address fixed at FFFFFFFFh. Therefore, the 512-Kbyte internal ROM is mapped from FFF80000h to FFFFFFFFh. The fixed interrupt vector table which contains each start address of interrupt handlers is mapped from FFFFFFDCh to FFFFFFFFh. The internal RAM is mapped to the beginning of the memory map with the starting address fixed at 00000400h. Therefore, the 63-Kbyte internal RAM is mapped from 00000400h to 0000FFFFh. Besides being used for data storage, the internal RAM functions as a stack(s) for subroutines and/or interrupt handlers. Special Function Registers (SFRs), which are control registers for peripheral functions, are mapped from 00000000h to 000003FFh, and from 00040000h to 0004FFFFh. Unoccupied SFR locations are reserved. No access is allowed. In memory expansion mode or microprocessor mode, some spaces are reserved for internal use and should not be accessed.
00000000h 00000400h
SFR1 Internal RAM
Internal RAM Capacity 32 Kbytes 40 Kbytes 63 Kbytes XXXXXXXXh 00008400h 0000A400h 00010000h
XXXXXXXXh Reserved 00040000h 00050000h 00060000h
SFR2 Reserved Internal ROM (Data space) (1) Reserved
00062000h FFFFFFDCh Undefined instruction Overflow BRK instruction Reserved Reserved Watchdog timer (5) Reserved NMI Reset FFFFFFFFh
Internal ROM Capacity 128 Kbytes 256 Kbytes 384 Kbytes 512 Kbytes YYYYYYYYh FFFE0000h FFFC0000h FFFA0000h FFF80000h
00080000h External space (2) FFE00000h Reserved (3) YYYYYYYYh Internal ROM (4) FFFFFFFFh
Notes: 1. Additional two 4-Kbyte spaces (blocks A and B) for storing data are provided in the flash memory version. 2. This space can be used in memory expansion mode or microprocessor mode. Addresses from 02000000h to FDFFFFFFh are inaccessible. 3. This space is reserved in memory expansion mode. It becomes external space in microprocessor mode. 4. This space can be used in single-chip mode or memory expansion mode. It becomes external space in microprocessor mode. 5. The watchdog timer interrupt shares the vector table with the oscillator stop detection interrupt and low voltage detection interrupt.
Figure 3.1
Memory Map
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 35 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
4.
Special Function Registers (SFRs)
SFRs are memory-mapped peripheral registers that control the operation of peripherals. Table 4.1 SFR List (1) to Table 4.24 SFR List (24) list the SFR details.
Table 4.1 SFR List (1)
Symbol Reset Value
Address Register 000000h 000001h 000002h 000003h 000004h Clock Control Register 000005h 000006h Flash Memory Control Register 000007h Protect Release Register 000008h 000009h 00000Ah 00000Bh 00000Ch 00000Dh 00000Eh 00000Fh 000010h External Bus Control Register 3/Flash Memory Rewrite Bus 000011h Control Register 3 000012h Chip Selects 2 and 3 Boundary Setting Register 000013h 000014h External Bus Control Register 2 000015h 000016h Chip Selects 1 and 2 Boundary Setting Register 000017h 000018h External Bus Control Register 1 000019h 00001Ah Chip selects 0 and 1 Boundary Setting Register 00001Bh 00001Ch External Bus Control Register 0/Flash Memory Rewrite Bus 00001Dh Control Register 0 00001Eh Peripheral Bus Control Register 00001Fh 000020h to 00005Fh X: Undefined Blanks are reserved. No access is allowed.
CCR FMCR PRR
0001 1000b 0000 0001b 00h
EBC3/FEBC3 CB23 EBC2 CB12 EBC1 CB01 EBC0/FEBC0 PBC
0000h 00h 0000h 00h 0000h 00h 0000h 0504h
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 36 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.2
Address 000060h 000061h 000062h 000063h 000064h 000065h 000066h 000067h 000068h 000069h 00006Ah 00006Bh 00006Ch 00006Dh 00006Eh 00006Fh 000070h 000071h 000072h 000073h 000074h 000075h 000076h 000077h 000078h 000079h 00007Ah 00007Bh 00007Ch 00007Dh 00007Eh 00007Fh 000080h 000081h 000082h 000083h 000084h 000085h 000086h 000087h
SFR List (2)
Register Timer B5 Interrupt Control Register UART5 Transmit/NACK Interrupt Control Register UART2 Receive/ACK Interrupt Control Register UART6 Transmit/NACK Interrupt Control Register UART3 Receive/ACK Interrupt Control Register UART5/6 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register UART4 Receive/ACK Interrupt Control Register DMA0 Transfer Complete Interrupt Control Register UART0/3 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register DMA2 Transfer Complete Interrupt Control Register A/D Converter 0 Convert Completion Interrupt Control Register Timer A0 Interrupt Control Register Intelligent I/O Interrupt Control Register 0 Timer A2 Interrupt Control Register Intelligent I/O Interrupt Control Register 2 Timer A4 Interrupt Control Register Intelligent I/O Interrupt Control Register 4 UART0 Receive/ACK Interrupt Control Register Intelligent I/O Interrupt Control Register 6 UART1 Receive/ACK Interrupt Control Register Intelligent I/O Interrupt Control Register 8 Timer B1 Interrupt Control Register Intelligent I/O Interrupt Control Register 10 Timer B3 Interrupt Control Register INT5 Interrupt Control Register INT3 Interrupt Control Register INT1 Interrupt Control Register Symbol TB5IC S5TIC S2RIC S6TIC S3RIC BCN5IC/BCN6IC S4RIC DM0IC BCN0IC/BCN3IC DM2IC AD0IC TA0IC IIO0IC TA2IC IIO2IC TA4IC IIO4IC S0RIC IIO6IC S1RIC IIO8IC TB1IC IIO10IC TB3IC INT5IC INT3IC INT1IC Reset Value XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XX00 X000b XX00 X000b XX00 X000b
UART2 Transmit/NACK Interrupt Control Register UART5 Receive/ACK Interrupt Control Register UART3 Transmit/NACK Interrupt Control Register UART6 Receive/ACK Interrupt Control Register UART4 Transmit/NACK Interrupt Control Register
S2TIC S5RIC S3TIC S6RIC S4TIC
XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b
UART2 Bus Collision, Start Condition/Stop Condition Detection BCN2IC Interrupt Control Register X: Undefined Blanks are reserved. No access is allowed.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 37 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.3
SFR List (3)
Symbol DM1IC BCN1IC/BCN4IC DM3IC KUPIC TA1IC IIO1IC TA3IC IIO3IC S0TIC IIO5IC S1TIC IIO7IC TB0IC IIO9IC TB2IC IIO11IC TB4IC INT4IC INT2IC INT0IC IIO0IR IIO1IR IIO2IR IIO3IR IIO4IR IIO5IR IIO6IR IIO7IR IIO8IR IIO9IR IIO10IR IIO11IR Reset Value XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XX00 X000b XX00 X000b XX00 X000b 0000 0XX1b 0000 0XX1b 0000 0X01b 0000 XXX1b 000X 0XX1b 000X 0XX1b 000X 0XX1b X00X 0XX1b XX0X 0XX1b 0000 0XX1b 0000 0XX1b 0000 0XX1b
Address Register 000088h DMA1 Transfer Complete Interrupt Control Register 000089h UART1/4 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register 00008Ah DMA3 Transfer Complete Interrupt Control Register 00008Bh Key Input Interrupt Control Register 00008Ch Timer A1 Interrupt Control Register 00008Dh Intelligent I/O Interrupt Control Register 1 00008Eh Timer A3 Interrupt Control Register 00008Fh Intelligent I/O Interrupt Control Register 3 000090h UART0 Transmit/NACK Interrupt Control Register 000091h Intelligent I/O Interrupt Control Register 5 000092h UART1 Transmit/NACK Interrupt Control Register 000093h Intelligent I/O Interrupt Control Register 7 000094h Timer B0 Interrupt Control Register 000095h Intelligent I/O Interrupt Control Register 9 000096h Timer B2 Interrupt Control Register 000097h Intelligent I/O Interrupt Control Register 11 000098h Timer B4 Interrupt Control Register 000099h 00009Ah INT4 Interrupt Control Register 00009Bh 00009Ch INT2 Interrupt Control Register 00009Dh 00009Eh INT0 Interrupt Control Register 00009Fh 0000A0h Intelligent I/O Interrupt Request Register 0 0000A1h Intelligent I/O Interrupt Request Register 1 0000A2h Intelligent I/O Interrupt Request Register 2 0000A3h Intelligent I/O Interrupt Request Register 3 0000A4h Intelligent I/O Interrupt Request Register 4 0000A5h Intelligent I/O Interrupt Request Register 5 0000A6h Intelligent I/O Interrupt Request Register 6 0000A7h Intelligent I/O Interrupt Request Register 7 0000A8h Intelligent I/O Interrupt Request Register 8 0000A9h Intelligent I/O Interrupt Request Register 9 0000AAh Intelligent I/O Interrupt Request Register 10 0000ABh Intelligent I/O Interrupt Request Register 11 0000ACh 0000ADh 0000AEh 0000AFh X: Undefined Blanks are reserved. No access is allowed.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 38 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.4
SFR List (4)
Symbol IIO0IE IIO1IE IIO2IE IIO3IE IIO4IE IIO5IE IIO6IE IIO7IE IIO8IE IIO9IE IIO10IE IIO11IE Reset Value 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h
Address Register 0000B0h Intelligent I/O Interrupt Enable Register 0 0000B1h Intelligent I/O Interrupt Enable Register 1 0000B2h Intelligent I/O Interrupt Enable Register 2 0000B3h Intelligent I/O Interrupt Enable Register 3 0000B4h Intelligent I/O Interrupt Enable Register 4 0000B5h Intelligent I/O Interrupt Enable Register 5 0000B6h Intelligent I/O Interrupt Enable Register 6 0000B7h Intelligent I/O Interrupt Enable Register 7 0000B8h Intelligent I/O Interrupt Enable Register 8 0000B9h Intelligent I/O Interrupt Enable Register 9 0000BAh Intelligent I/O Interrupt Enable Register 10 0000BBh Intelligent I/O Interrupt Enable Register 11 0000BCh 0000BDh 0000BEh 0000BFh 0000C0h 0000C1h 0000C2h 0000C3h 0000C4h 0000C5h 0000C6h 0000C7h 0000C8h 0000C9h 0000CAh 0000CBh 0000CCh 0000CDh 0000CEh 0000CFh 0000D0h 0000D1h 0000D2h 0000D3h 0000D4h 0000D5h 0000D6h 0000D7h 0000D8h 0000D9h 0000DAh 0000DBh 0000DCh 0000DDh UART7 Transmit Interrupt Control Register 0000DEh 0000DFh UART8 Transmit Interrupt Control Register X: Undefined Blanks are reserved. No access is allowed.
S7TIC S8TIC
XXXX X000b XXXX X000b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 39 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.5
SFR List (5)
Symbol Reset Value
Address Register 0000E0h 0000E1h 0000E2h 0000E3h 0000E4h 0000E5h 0000E6h 0000E7h 0000E8h 0000E9h 0000EAh 0000EBh 0000ECh 0000EDh 0000EEh 0000EFh 0000F0h 0000F1h 0000F2h 0000F3h 0000F4h 0000F5h 0000F6h 0000F7h 0000F8h 0000F9h 0000FAh 0000FBh 0000FCh 0000FDh UART7 Receive Interrupt Control Register 0000FEh 0000FFh UART8 Receive Interrupt Control Register 000100h Group 1 Time Measurement/Waveform Generation Register 0 000101h 000102h Group 1 Time Measurement/Waveform Generation Register 1 000103h 000104h Group 1 Time Measurement/Waveform Generation Register 2 000105h 000106h Group 1 Time Measurement/Waveform Generation Register 3 000107h X: Undefined Blanks are reserved. No access is allowed.
S7RIC S8RIC G1TM0/G1PO0 G1TM1/G1PO1 G1TM2/G1PO2 G1TM3/G1PO3
XXXX X000b XXXX X000b XXXXh XXXXh XXXXh XXXXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 40 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.6
SFR List (6)
Symbol G1TM4/G1PO4 G1TM5/G1PO5 G1TM6/G1PO6 G1TM7/G1PO7 G1POCR0 G1POCR1 G1POCR2 G1POCR3 G1POCR4 G1POCR5 G1POCR6 G1POCR7 G1TMCR0 G1TMCR1 G1TMCR2 G1TMCR3 G1TMCR4 G1TMCR5 G1TMCR6 G1TMCR7 G1BT G1BCR0 G1BCR1 G1TPR6 G1TPR7 G1FE G1FS Reset Value XXXXh XXXXh XXXXh XXXXh 0000 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 00h 00h 00h 00h 00h 00h 00h 00h XXXXh 00h 0000 0000b 00h 00h 00h 00h
Address Register 000108h Group 1 Time Measurement/Waveform Generation Register 4 000109h 00010Ah Group 1 Time Measurement/Waveform Generation Register 5 00010Bh 00010Ch Group 1 Time Measurement/Waveform Generation Register 6 00010Dh 00010Eh Group 1 Time Measurement/Waveform Generation Register 7 00010Fh 000110h Group 1 Waveform Generation Control Register 0 000111h Group 1 Waveform Generation Control Register 1 000112h Group 1 Waveform Generation Control Register 2 000113h Group 1 Waveform Generation Control Register 3 000114h Group 1 Waveform Generation Control Register 4 000115h Group 1 Waveform Generation Control Register 5 000116h Group 1 Waveform Generation Control Register 6 000117h Group 1 Waveform Generation Control Register 7 000118h Group 1 Time Measurement Control Register 0 000119h Group 1 Time Measurement Control Register 1 00011Ah Group 1 Time Measurement Control Register 2 00011Bh Group 1 Time Measurement Control Register 3 00011Ch Group 1 Time Measurement Control Register 4 00011Dh Group 1 Time Measurement Control Register 5 00011Eh Group 1 Time Measurement Control Register 6 00011Fh Group 1 Time Measurement Control Register 7 000120h Group 1 Base Timer Register 000121h 000122h Group 1 Base Timer Control Register 0 000123h Group 1 Base Timer Control Register 1 000124h Group 1 Timer Measurement Prescaler Register 6 000125h Group 1 Timer Measurement Prescaler Register 7 000126h Group 1 Function Enable Register 000127h Group 1 Function Select Register 000128h 000129h 00012Ah 00012Bh 00012Ch 00012Dh 00012Eh 00012Fh 000130h to 00013Fh X: Undefined Blanks are reserved. No access is allowed.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 41 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.7
SFR List (7)
Symbol G2PO0 G2PO1 G2PO2 G2PO3 G2PO4 G2PO5 G2PO6 G2PO7 G2POCR0 G2POCR1 G2POCR2 G2POCR3 G2POCR4 G2POCR5 G2POCR6 G2POCR7 Reset Value XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b
Address Register 000140h Group 2 Waveform Generation Register 0 000141h 000142h Group 2 Waveform Generation Register 1 000143h 000144h Group 2 Waveform Generation Register 2 000145h 000146h Group 2 Waveform Generation Register 3 000147h 000148h Group 2 Waveform Generation Register 4 000149h 00014Ah Group 2 Waveform Generation Register 5 00014Bh 00014Ch Group 2 Waveform Generation Register 6 00014Dh 00014Eh Group 2 Waveform Generation Register 7 00014Fh 000150h Group 2 Waveform Generation Control Register 0 000151h Group 2 Waveform Generation Control Register 1 000152h Group 2 Waveform Generation Control Register 2 000153h Group 2 Waveform Generation Control Register 3 000154h Group 2 Waveform Generation Control Register 4 000155h Group 2 Waveform Generation Control Register 5 000156h Group 2 Waveform Generation Control Register 6 000157h Group 2 Waveform Generation Control Register 7 000158h 000159h 00015Ah 00015Bh 00015Ch 00015Dh 00015Eh 00015Fh 000160h Group 2 Base Timer Register 000161h 000162h Group 2 Base Timer Control Register 0 000163h Group 2 Base Timer Control Register 1 000164h Base Timer Start Register 000165h 000166h Group 2 Function Enable Register 000167h Group 2 RTP Output Buffer Register 000168h 000169h 00016Ah Group 2 Serial Interface Mode Register 00016Bh Group 2 Serial Interface Control Register 00016Ch Group 2 SI/O Transmit Buffer Register 00016Dh 00016Eh Group 2 SI/O Receive Buffer Register 00016Fh X: Undefined Blanks are reserved. No access is allowed.
G2BT G2BCR0 G2BCR1 BTSR G2FE G2RTP
XXXXh 00h 0000 0000b XXXX 0000b 00h 00h
G2MR G2CR G2TB G2RB
00XX X000b 0000 X110b XXXXh XXXXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 42 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.8
SFR List (8)
Symbol IEAR IECR IETIF IERIF Reset Value XXXXh 00XX X000b XXX0 0000b XXX0 0000b
Address Register 000170h Group 2 IE Bus Address Register 000171h 000172h Group 2 IE Bus Control Register 000173h Group 2 IE Bus Transmit Interrupt Source Detect Register 000174h Group 2 IE Bus Receive Interrupt Source Detect Register 000175h 000176h 000177h 000178h 000179h 00017Ah 00017Bh 00017Ch 00017Dh 00017Eh 00017Fh 000180h Group 0 Time Measurement/Waveform Generation Register 0 000181h 000182h Group 0 Time Measurement/Waveform Generation Register 1 000183h 000184h Group 0 Time Measurement/Waveform Generation Register 2 000185h 000186h Group 0 Time Measurement/Waveform Generation Register 3 000187h 000188h Group 0 Time Measurement/Waveform Generation Register 4 000189h 00018Ah Group 0 Time Measurement/Waveform Generation Register 5 00018Bh 00018Ch Group 0 Time Measurement/Waveform Generation Register 6 00018Dh 00018Eh Group 0 Time Measurement/Waveform Generation Register 7 00018Fh 000190h Group 0 Waveform Generation Control Register 0 000191h Group 0 Waveform Generation Control Register 1 000192h Group 0 Waveform Generation Control Register 2 000193h Group 0 Waveform Generation Control Register 3 000194h Group 0 Waveform Generation Control Register 4 000195h Group 0 Waveform Generation Control Register 5 000196h Group 0 Waveform Generation Control Register 6 000197h Group 0 Waveform Generation Control Register 7 000198h Group 0 Time Measurement Control Register 0 000199h Group 0 Time Measurement Control Register 1 00019Ah Group 0 Time Measurement Control Register 2 00019Bh Group 0 Time Measurement Control Register 3 00019Ch Group 0 Time Measurement Control Register 4 00019Dh Group 0 Time Measurement Control Register 5 00019Eh Group 0 Time Measurement Control Register 6 00019Fh Group 0 Time Measurement Control Register 7 X: Undefined Blanks are reserved. No access is allowed.
G0TM0/G0PO0 G0TM1/G0PO1 G0TM2/G0PO2 G0TM3/G0PO3 G0TM4/G0PO4 G0TM5/G0PO5 G0TM6/G0PO6 G0TM7/G0PO7 G0POCR0 G0POCR1 G0POCR2 G0POCR3 G0POCR4 G0POCR5 G0POCR6 G0POCR7 G0TMCR0 G0TMCR1 G0TMCR2 G0TMCR3 G0TMCR4 G0TMCR5 G0TMCR6 G0TMCR7
XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh 0000 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 00h 00h 00h 00h 00h 00h 00h 00h
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 43 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.9
SFR List (9)
Symbol G0BT G0BCR0 G0BCR1 G0TPR6 G0TPR7 G0FE G0FS Reset Value XXXXh 00h 0000 0000b 00h 00h 00h 00h
Address Register 0001A0h Group 0 Base Timer Register 0001A1h 0001A2h Group 0 Base Timer Control Register 0 0001A3h Group 0 Base Timer Control Register 1 0001A4h Group 0 Timer Measurement Prescaler Register 6 0001A5h Group 0 Timer Measurement Prescaler Register 7 0001A6h Group 0 Function Enable Register 0001A7h Group 0 Function Select Register 0001A8h 0001A9h 0001AAh 0001ABh 0001ACh 0001ADh 0001AEh 0001AFh 0001B0h 0001B1h 0001B2h 0001B3h 0001B4h 0001B5h 0001B6h 0001B7h 0001B8h 0001B9h 0001BAh 0001BBh 0001BCh 0001BDh 0001BEh 0001BFh 0001C0h 0001C1h 0001C2h 0001C3h 0001C4h UART5 Special Mode Register 4 0001C5h UART5 Special Mode Register 3 0001C6h UART5 Special Mode Register 2 0001C7h UART5 Special Mode Register 0001C8h UART5 Transmit/Receive Mode Register 0001C9h UART5 Bit Rate Register 0001CAh UART5 Transmit Buffer Register 0001CBh 0001CCh UART5 Transmit/Receive Control Register 0 0001CDh UART5 Transmit/Receive Control Register 1 0001CEh UART5 Receive Buffer Register 0001CFh X: Undefined Blanks are reserved. No access is allowed.
U5SMR4 U5SMR3 U5SMR2 U5SMR U5MR U5BRG U5TB U5C0 U5C1 U5RB
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 44 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.10
SFR List (10)
Symbol Reset Value
Address Register 0001D0h 0001D1h 0001D2h 0001D3h 0001D4h UART6 Special Mode Register 4 0001D5h UART6 Special Mode Register 3 0001D6h UART6 Special Mode Register 2 0001D7h UART6 Special Mode Register 0001D8h UART6 Transmit/Receive Mode Register 0001D9h UART6 Bit Rate Register 0001DAh UART6 Transmit Buffer Register 0001DBh 0001DCh UART6 Transmit/Receive Control Register 0 0001DDh UART6 Transmit/Receive Control Register 1 0001DEh UART6 Receive Buffer Register 0001DFh 0001E0h UART7 Transmit/Receive Mode Register 0001E1h UART7 Bit Rate Register 0001E2h UART7 Transmit Buffer Register 0001E3h 0001E4h UART7 Transmit/Receive Control Register 0 0001E5h UART7 Transmit/Receive Control Register 1 0001E6h UART7 Receive Buffer Register 0001E7h 0001E8h UART8 Transmit/Receive Mode Register 0001E9h UART8 Bit Rate Register 0001EAh UART8 Transmit Buffer Register 0001EBh 0001ECh UART8 Transmit/Receive Control Register 0 0001EDh UART8 Transmit/Receive Control Register 1 0001EEh UART8 Receive Buffer Register 0001EFh 0001F0h UART7, UART8 Transmit/Receive Control Register 2 0001F1h 0001F2h 0001F3h 0001F4h 0001F5h 0001F6h 0001F7h 0001F8h 0001F9h 0001FAh 0001FBh 0001FCh 0001FDh 0001FEh 0001FFh X: Undefined Blanks are reserved. No access is allowed.
U6SMR4 U6SMR3 U6SMR2 U6SMR U6MR U6BRG U6TB U6C0 U6C1 U6RB U7MR U7BRG U7TB U7C0 U7C1 U7RB U8MR U8BRG U8TB U8C0 U8C1 U8RB U78CON
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh 00h XXh XXXXh 00X0 1000b XXXX 0010b XXXXh 00h XXh XXXXh 00X0 1000b XXXX 0010b XXXXh X000 0000b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 45 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.11
SFR List (11)
Symbol Reset Value
Address Register 000200h to 0002BFh 0002C0h X0 Register/Y0 Register 0002C1h 0002C2h X1 Register/Y1 Register 0002C3h 0002C4h X2 Register/Y2 Register 0002C5h 0002C6h X3 Register/Y3 Register 0002C7h 0002C8h X4 Register/Y4 Register 0002C9h 0002CAh X5 Register/Y5 Register 0002CBh 0002CCh X6 Register/Y6 Register 0002CDh 0002CEh X7 Register/Y7 Register 0002CFh 0002D0h X8 Register/Y8 Register 0002D1h 0002D2h X9 Register/Y9 Register 0002D3h 0002D4h X10 Register/Y10 Register 0002D5h 0002D6h X11 Register/Y11 Register 0002D7h 0002D8h X12 Register/Y12 Register 0002D9h 0002DAh X13 Register/Y13 Register 0002DBh 0002DCh X14 Register/Y14 Register 0002DDh 0002DEh X15 Register/Y15 Register 0002DFh 0002E0h XY Control Register 0002E1h 0002E2h 0002E3h 0002E4h UART1 Special Mode Register 4 0002E5h UART1 Special Mode Register 3 0002E6h UART1 Special Mode Register 2 0002E7h UART1 Special Mode Register 0002E8h UART1 Transmit/Receive Mode Register 0002E9h UART1 Bit Rate Register 0002EAh UART1 Transmit Buffer Register 0002EBh 0002ECh UART1 Transmit/Receive Control Register 0 0002EDh UART1 Transmit/Receive Control Register 1 0002EEh UART1 Receive Buffer Register 0002EFh X: Undefined Blanks are reserved. No access is allowed.
X0R/Y0R X1R/Y1R X2R/Y2R X3R/Y3R X4R/Y4R X5R/Y5R X6R/Y6R X7R/Y7R X8R/Y8R X9R/Y9R X10R/Y10R X11R/Y11R X12R/Y12R X13R/Y13R X14R/Y14R X15R/Y15R XYC
XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXXh XXXX XX00b
U1SMR4 U1SMR3 U1SMR2 U1SMR U1MR U1BRG U1TB U1C0 U1C1 U1RB
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 46 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.12
SFR List (12)
Symbol Reset Value
Address Register 0002F0h 0002F1h 0002F2h 0002F3h 0002F4h UART4 Special Mode Register 4 0002F5h UART4 Special Mode Register 3 0002F6h UART4 Special Mode Register 2 0002F7h UART4 Special Mode Register 0002F8h UART4 Transmit/Receive Mode Register 0002F9h UART4 Bit Rate Register 0002FAh UART4 Transmit Buffer Register 0002FBh 0002FCh UART4 Transmit/Receive Control Register 0 0002FDh UART4 Transmit/Receive Control Register 1 0002FEh UART4 Receive Buffer Register 0002FFh 000300h Count Start Register for Timers B3, B4 and B5 000301h 000302h Timer A1-1 Register 000303h 000304h Timer A2-1 Register 000305h 000306h Timer A4-1 Register 000307h 000308h Three-phase PWM Control Register 0 000309h Three-phase PWM Control Register 1 00030Ah Three-phase Output Buffer Register 0 00030Bh Three-phase Output Buffer Register 1 00030Ch Dead Time Timer 00030Dh Timer B2 Interrupt Generating Frequency Set Counter 00030Eh 00030Fh 000310h Timer B3 Register 000311h 000312h Timer B4 Register 000313h 000314h Timer B5 Register 000315h 000316h 000317h 000318h 000319h 00031Ah 00031Bh Timer B3 Mode Register 00031Ch Timer B4 Mode Register 00031Dh Timer B5 Mode Register 00031Eh 00031Fh X: Undefined Blanks are reserved. No access is allowed.
U4SMR4 U4SMR3 U4SMR2 U4SMR U4MR U4BRG U4TB U4C0 U4C1 U4RB TBSR TA11 TA21 TA41 INVC0 INVC1 IDB0 IDB1 DTT ICTB2
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh 000X XXXXb XXXXh XXXXh XXXXh 00h 00h XX11 1111b XX11 1111b XXh XXh
TB3 TB4 TB5
XXXXh XXXXh XXXXh
TB3MR TB4MR TB5MR
00XX 0000b 00XX 0000b 00XX 0000b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 47 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.13
SFR List (13)
Symbol Reset Value
Address Register 000320h 000321h 000322h 000323h 000324h UART3 Special Mode Register 4 000325h UART3 Special Mode Register 3 000326h UART3 Special Mode Register 2 000327h UART3 Special Mode Register 000328h UART3 Transmit/Receive Mode Register 000329h UART3 Bit Rate Register 00032Ah UART3 Transmit Buffer Register 00032Bh 00032Ch UART3 Transmit/Receive Control Register 0 00032Dh UART3 Transmit/Receive Control Register 1 00032Eh UART3 Receive Buffer Register 00032Fh 000330h 000331h 000332h 000333h 000334h UART2 Special Mode Register 4 000335h UART2 Special Mode Register 3 000336h UART2 Special Mode Register 2 000337h UART2 Special Mode Register 000338h UART2 Transmission/Receive Mode Register 000339h UART2 Bit Rate Register 00033Ah UART2 Transmit Buffer Register 00033Bh 00033Ch UART2 Transmit/Receive Control Register 0 00033Dh UART2 Transmit/Receive Control Register 1 00033Eh UART2 Receive Buffer Register 00033Fh 000340h Count Start Register 000341h Clock Prescaler Reset Register 000342h One-shot Start Register 000343h Trigger Select Register 000344h Increment/Decrement Counting Select Register 000345h 000346h Timer A0 Register 000347h 000348h Timer A1 Register 000349h 00034Ah Timer A2 Register 00034Bh 00034Ch Timer A3 Register 00034Dh 00034Eh Timer A4 Register 00034Fh X: Undefined Blanks are reserved. No access is allowed.
U3SMR4 U3SMR3 U3SMR2 U3SMR U3MR U3BRG U3TB U3C0 U3C1 U3RB
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh
U2SMR4 U2SMR3 U2SMR2 U2SMR U2MR U2BRG U2TB U2C0 U2C1 U2RB TABSR CPSRF ONSF TRGSR UDF TA0 TA1 TA2 TA3 TA4
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh 00h 0XXX XXXXb 00h 00h 0000 0000b XXXXh XXXXh XXXXh XXXXh XXXXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 48 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.14
SFR List (14)
Symbol TB0 TB1 TB2 TA0MR TA1MR TA2MR TA3MR TA4MR TB0MR TB1MR TB2MR TB2SC TCSPR Reset Value XXXXh XXXXh XXXXh 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 00XX 0000b 00XX 0000b 00XX 0000b XXXX XXX0b 0000 0000b
Address Register 000350h Timer B0 Register 000351h 000352h Timer B1 Register 000353h 000354h Timer B2 Register 000355h 000356h Timer A0 Mode Register 000357h Timer A1 Mode Register 000358h Timer A2 Mode Register 000359h Timer A3 Mode Register 00035Ah Timer A4 Mode Register 00035Bh Timer B0 Mode Register 00035Ch Timer B1 Mode Register 00035Dh Timer B2 Mode Register 00035Eh Timer B2 Special Mode Register 00035Fh Count Source Prescaler Register 000360h 000361h 000362h 000363h 000364h UART0 Special Mode Register 4 000365h UART0 Special Mode Register 3 000366h UART0 Special Mode Register 2 000367h UART0 Special Mode Register 000368h UART0 Transmit/Receive Mode Register 000369h UART0 Bit Rate Register 00036Ah UART0 Transmit Buffer Register 00036Bh 00036Ch UART0 Transmit/Receive Control Register 0 00036Dh UART0 Transmit/Receive Control Register 1 00036Eh UART0 Receive Buffer Register 00036Fh 000370h 000371h 000372h 000373h 000374h 000375h 000376h 000377h 000378h 000379h 00037Ah 00037Bh 00037Ch CRC Data Register 00037Dh 00037Eh CRC Input Register 00037Fh X: Undefined Blanks are reserved. No access is allowed.
U0SMR4 U0SMR3 U0SMR2 U0SMR U0MR U0BRG U0TB U0C0 U0C1 U0RB
00h 00h 00h 00h 00h XXh XXXXh 0000 1000b 0000 0010b XXXXh
CRCD CRCIN
XXXXh XXh
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 49 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.15
SFR List (15)
Symbol AD00 AD01 AD02 AD03 AD04 AD05 AD06 AD07 Reset Value 00XXh 00XXh 00XXh 00XXh 00XXh 00XXh 00XXh 00XXh
Address Register 000380h A/D0 Register 0 000381h 000382h A/D0 Register 1 000383h 000384h A/D0 Register 2 000385h 000386h A/D0 Register 3 000387h 000388h A/D0 Register 4 000389h 00038Ah A/D0 Register 5 00038Bh 00038Ch A/D0 Register 6 00038Dh 00038Eh A/D0 Register 7 00038Fh 000390h 000391h 000392h A/D0 Control Register 4 000393h 000394h A/D0 Control Register 2 000395h A/D0 Control Register 3 000396h A/D0 Control Register 0 000397h A/D0 Control Register 1 000398h D/A Register 0 000399h 00039Ah D/A Register 1 00039Bh 00039Ch D/A Control Register 00039Dh 00039Eh 00039Fh 0003A0h 0003A1h 0003A2h 0003A3h 0003A4h 0003A5h 0003A6h 0003A7h 0003A8h 0003A9h 0003AAh 0003ABh 0003ACh 0003ADh 0003AEh 0003AFh X: Undefined Blanks are reserved. No access is allowed.
AD0CON4 AD0CON2 AD0CON3 AD0CON0 AD0CON1 DA0 DA1 DACON
XXXX 00XXb X00X X000b XXXX X000b 00h 00h XXh XXh XXXX XX00b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 50 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.16
SFR List (16)
Symbol Reset Value
Address Register 0003B0h 0003B1h 0003B2h 0003B3h 0003B4h 0003B5h 0003B6h 0003B7h 0003B8h 0003B9h 0003BAh 0003BBh 0003BCh 0003BDh 0003BEh 0003BFh 0003C0h Port P0 Register 0003C1h Port P1 Register 0003C2h Port P0 Direction Register 0003C3h Port P1 Direction Register 0003C4h Port P2 Register 0003C5h Port P3 Register 0003C6h Port P2 Direction Register 0003C7h Port P3 Direction Register 0003C8h Port P4 Register 0003C9h Port P5 Register 0003CAh Port P4 Direction Register 0003CBh Port P5 Direction Register 0003CCh Port P6 Register 0003CDh Port P7 Register 0003CEh Port P6 Direction Register 0003CFh Port P7 Direction Register 0003D0h Port P8 Register 0003D1h Port P9 Register 0003D2h Port P8 Direction Register 0003D3h Port P9 Direction Register 0003D4h Port P10 Register 0003D5h 0003D6h Port P10 Direction Register 0003D7h 0003D8h 0003D9h 0003DAh 0003DBh 0003DCh 0003DDh 0003DEh 0003DFh X: Undefined Blanks are reserved. No access is allowed.
P0 P1 PD0 PD1 P2 P3 PD2 PD3 P4 P5 PD4 PD5 P6 P7 PD6 PD7 P8 P9 PD8 PD9 P10 PD10
XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 00X0 0000b 0000 0000b XXh 0000 0000b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 51 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.17
SFR List (17)
Symbol Reset Value
Address Register 0003E0h 0003E1h 0003E2h 0003E3h 0003E4h 0003E5h 0003E6h 0003E7h 0003E8h 0003E9h 0003EAh 0003EBh 0003ECh 0003EDh 0003EEh 0003EFh 0003F0h Pull-up Control Register 0 0003F1h Pull-up Control Register 1 0003F2h Pull-up Control Register 2 0003F3h Pull-up Control Register 3 0003F4h 0003F5h 0003F6h 0003F7h 0003F8h 0003F9h 0003FAh 0003FBh 0003FCh 0003FDh 0003FEh 0003FFh Port Control Register X: Undefined Blanks are reserved. No access is allowed.
PUR0 PUR1 PUR2 PUR3
0000 0000b XXXX 0000b 0000 0000b XXXX XX00b
PCR
XXXX XXX0b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 52 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.18
SFR List (18)
Symbol FMR0 FMSR0 Reset Value 0X01 XX00b 1000 0000b
Address Register 040000h Flash Memory Control Register 0 040001h Flash Memory Status Register 0 040002h 040003h 040004h 040005h 040006h 040007h 040008h Flash Register Protection Unlock Register 0 040009h Flash Memory Control Register 1 04000Ah Block Protect Bit Monitor Register 0 04000Bh Block Protect Bit Monitor Register 1 04000Ch 04000Dh 04000Eh 04000Fh 040010h 040011h 040012h 040013h 040014h 040015h 040016h 040017h 040018h 040019h 04001Ah 04001Bh 04001Ch 04001Dh 04001Eh 04001Fh 040020h PLL Control Register 0 040021h PLL Control Register 1 040022h 040023h 040024h 040025h 040026h 040027h 040028h 040029h 04002Ah 04002Bh 04002Ch 04002Dh 04002Eh 04002Fh X: Undefined Blanks are reserved. No access is allowed. Note: 1. The status of protect bit of each block in flash memory is reflected.
FPR0 FMR1 FBPM0 FBPM1
00h 0000 0010b ??X? ????b (1) XXX? ????b (1)
PLC0 PLC1
0000 0001b 0001 1111b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 53 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.19
SFR List (19)
Symbol Reset Value
Address Register 040030h to 04003Fh 040040h 040041h 040042h 040043h 040044h Processor Mode Register 0 (1)
PM0
1000 0000b (CNVSS pin = Low) 0000 0011b (CNVSS pin = High) 0000 1000b 0010 0000b 00h XXXX X000b 0000 0000b 00h
040045h 040046h System Clock Control Register 0 040047h System Clock Control Register 1 040048h Processor Mode Register 3 040049h 04004Ah Protect Register 04004Bh 04004Ch Protect Register 3 04004Dh Oscillator Stop Detection Register 04004Eh 04004Fh 040050h 040051h 040052h 040053h Processor Mode Register 2 040054h Chip Select Output Pin Setting Register 0 040055h Chip Select Output Pin Setting Register 1 040056h 040057h 040058h 040059h 04005Ah Low Speed Mode Clock Control Register 04005Bh 04005Ch 04005Dh 04005Eh 04005Fh 040060h Voltage Regulator Control Register 040061h 040062h Low Voltage Detector Control Register 040063h 040064h Detection Voltage Configuration Register 040065h 040066h 040067h 040068h to 040093h X: Undefined Blanks are reserved. No access is allowed.
CM0 CM1 PM3 PRCR PRCR3 CM2
PM2 CSOP0 CSOP1
00h 1000 XXXXb 01X0 XXXXb
CM3
XXXX XX00b
VRCR LVDC DVCR
0000 0000b 0000 XX00b 0000 XXXXb
Note: 1. The value in the PM0 register remains unchanged even after a software reset or watchdog timer reset.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 54 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.20
SFR List (20)
Symbol Reset Value
Address Register 040094h 040095h 040096h 040097h Three-phase Output Buffer Control Register 040098h Input Function Select Register 0 040099h 04009Ah Input Function Select Register 2 04009Bh Input Function Select Register 3 04009Ch 04009Dh 04009Eh 04009Fh Input Function Select Register 7 (3) 0400A0h Port P0_0 Function Select Register 0400A1h Port P1_0 Function Select Register 0400A2h Port P0_1 Function Select Register 0400A3h Port P1_1 Function Select Register 0400A4h Port P0_2 Function Select Register 0400A5h Port P1_2 Function Select Register 0400A6h Port P0_3 Function Select Register 0400A7h Port P1_3 Function Select Register 0400A8h Port P0_4 Function Select Register 0400A9h Port P1_4 Function Select Register 0400AAh Port P0_5 Function Select Register 0400ABh Port P1_5 Function Select Register 0400ACh Port P0_6 Function Select Register 0400ADh Port P1_6 Function Select Register 0400AEh Port P0_7 Function Select Register 0400AFh Port P1_7 Function Select Register 0400B0h Port P2_0 Function Select Register 0400B1h Port P3_0 Function Select Register 0400B2h Port P2_1 Function Select Register 0400B3h Port P3_1 Function Select Register 0400B4h Port P2_2 Function Select Register 0400B5h Port P3_2 Function Select Register 0400B6h Port P2_3 Function Select Register 0400B7h Port P3_3 Function Select Register 0400B8h Port P2_4 Function Select Register 0400B9h Port P3_4 Function Select Register 0400BAh Port P2_5 Function Select Register 0400BBh Port P3_5 Function Select Register 0400BCh Port P2_6 Function Select Register 0400BDh Port P3_6 Function Select Register 0400BEh Port P2_7 Function Select Register 0400BFh Port P3_7 Function Select Register X: Undefined Blanks are reserved. No access is allowed.
IOBC IFS0 IFS2 IFS3
0XXX XXXXb X000 0000b (1) 0000 00X0b (2) XXXX XX00b
IFS7 P0_0S P1_0S P0_1S P1_1S P0_2S P1_2S P0_3S P1_3S P0_4S P1_4S P0_5S P1_5S P0_6S P1_6S P0_7S P1_7S P2_0S P3_0S P2_1S P3_1S P2_2S P3_2S P2_3S P3_3S P2_4S P3_4S P2_5S P3_5S P2_6S P3_6S P2_7S P3_7S
XXXX XX0Xb 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b
Notes: 1. The reset value is 0000 0000b in the 80-/64-pin package. 2. The reset value is 0000 000Xb in the 80-/64-pin package. 3. This register is provided for the 80-64/pin package. No access is allowed in the 100-pin package.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 55 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.21
SFR List (21)
Symbol P4_0S P5_0S P4_1S P5_1S P4_2S P5_2S P4_3S P5_3S P4_4S P5_4S P4_5S P5_5S P4_6S P5_6S P4_7S P5_7S P6_0S P7_0S P6_1S P7_1S P6_2S P7_2S P6_3S P7_3S P6_4S P7_4S P6_5S P7_5S P6_6S P7_6S P6_7S P7_7S P8_0S P8_1S P8_2S P8_3S P9_3S P8_4S P9_4S P9_5S P8_6S P9_6S P8_7S P9_7S Reset Value XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b XXXX X000b
Address Register 0400C0h Port P4_0 Function Select Register 0400C1h Port P5_0 Function Select Register 0400C2h Port P4_1 Function Select Register 0400C3h Port P5_1 Function Select Register 0400C4h Port P4_2 Function Select Register 0400C5h Port P5_2 Function Select Register 0400C6h Port P4_3 Function Select Register 0400C7h Port P5_3 Function Select Register 0400C8h Port P4_4 Function Select Register 0400C9h Port P5_4 Function Select Register 0400CAh Port P4_5 Function Select Register 0400CBh Port P5_5 Function Select Register 0400CCh Port P4_6 Function Select Register 0400CDh Port P5_6 Function Select Register 0400CEh Port P4_7 Function Select Register 0400CFh Port P5_7 Function Select Register 0400D0h Port P6_0 Function Select Register 0400D1h Port P7_0 Function Select Register 0400D2h Port P6_1 Function Select Register 0400D3h Port P7_1 Function Select Register 0400D4h Port P6_2 Function Select Register 0400D5h Port P7_2 Function Select Register 0400D6h Port P6_3 Function Select Register 0400D7h Port P7_3 Function Select Register 0400D8h Port P6_4 Function Select Register 0400D9h Port P7_4 Function Select Register 0400DAh Port P6_5 Function Select Register 0400DBh Port P7_5 Function Select Register 0400DCh Port P6_6 Function Select Register 0400DDh Port P7_6 Function Select Register 0400DEh Port P6_7 Function Select Register 0400DFh Port P7_7 Function Select Register 0400E0h Port P8_0 Function Select Register 0400E1h 0400E2h Port P8_1 Function Select Register 0400E3h 0400E4h Port P8_2 Function Select Register 0400E5h 0400E6h Port P8_3 Function Select Register 0400E7h Port P9_3 Function Select Register 0400E8h Port P8_4 Function Select Register 0400E9h Port P9_4 Function Select Register 0400EAh 0400EBh Port P9_5 Function Select Register 0400ECh Port P8_6 Function Select Register 0400EDh Port P9_6 Function Select Register 0400EEh Port P8_7 Function Select Register 0400EFh Port P9_7 Function Select Register X: Undefined Blanks are reserved. No access is allowed.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 56 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.22
SFR List (22)
Symbol P10_0S P10_1S P10_2S P10_3S P10_4S P10_5S P10_6S P10_7S Reset Value 0XXX X000b 0XXX X000b 0XXX X000b 0XXX X000b 0XXX X000b 0XXX X000b 0XXX X000b 0XXX X000b
Address Register 0400F0h Port P10_0 Function Select Register 0400F1h 0400F2h Port P10_1 Function Select Register 0400F3h 0400F4h Port P10_2 Function Select Register 0400F5h 0400F6h Port P10_3 Function Select Register 0400F7h 0400F8h Port P10_4 Function Select Register 0400F9h 0400FAh Port P10_5 Function Select Register 0400FBh 0400FCh Port P10_6 Function Select Register 0400FDh 0400FEh Port P10_7 Function Select Register 0400FFh 040100h 040101h 040102h 040103h 040104h 040105h 040106h 040107h 040108h 040109h 04010Ah 04010Bh 04010Ch 04010Dh 04010Eh 04010Fh 040110h 040111h 040112h 040113h 040114h 040115h 040116h 040117h 040118h 040119h 04011Ah 04011Bh 04011Ch 04011Dh 04011Eh 04011Fh X: Undefined Blanks are reserved. No access is allowed.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 57 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.23
SFR List (23)
Symbol Reset Value
Address Register 040120h to 04403Fh 044040h 044041h 044042h 044043h 044044h 044045h 044046h 044047h 044048h 044049h 04404Ah 04404Bh 04404Ch 04404Dh 04404Eh Watchdog Timer Start Register 04404Fh Watchdog Timer Control Register 044050h 044051h 044052h 044053h 044054h 044055h 044056h 044057h 044058h 044059h 04405Ah 04405Bh 04405Ch 04405Dh 04405Eh 04405Fh Protect Register 2 X: Undefined Blanks are reserved. No access is allowed.
WDTS WDC
XXXX XXXXb 000X XXXXb
PRCR2
0XXX XXXXb
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 58 of 99
R32C/111 Group
4. Special Function Registers (SFRs)
Table 4.24
SFR List (24)
Symbol Reset Value
Address Register 044060h 044061h 044062h 044063h 044064h 044065h 044066h 044067h 044068h 044069h 04406Ah 04406Bh 04406Ch 04406Dh External Interrupt Source Select Register 1 04406Eh 04406Fh External Interrupt Source Select Register 0 044070h DMA0 Request Source Select Register 2 044071h DMA1 Request Source Select Register 2 044072h DMA2 Request Source Select Register 2 044073h DMA3 Request Source Select Register 2 044074h 044075h 044076h 044077h 044078h DMA0 Request Source Select Register 044079h DMA1 Request Source Select Register 04407Ah DMA2 Request Source Select Register 04407Bh DMA3 Request Source Select Register 04407Ch 04407Dh Wake-up IPL Setting Register 2 04407Eh 04407Fh Wake-up IPL Setting Register 1 044080h 044081h 044082h 044083h 044084h 044085h 044086h 044087h 044088h 044089h 04408Ah 04408Bh 04408Ch 04408Dh 04408Eh 04408Fh X: Undefined Blanks are reserved. No access is allowed.
IFSR1 IFSR0 DM0SL2 DM1SL2 DM2SL2 DM3SL2
X0XX XXXXb 0000 0000b XX00 0000b XX00 0000b XX00 0000b XX00 0000b
DM0SL DM1SL DM2SL DM3SL RIPL2 RIPL1
XXX0 0000b XXX0 0000b XXX0 0000b XXX0 0000b XX0X 0000b XX0X 0000b
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 59 of 99
R32C/111 Group
5. Electrical Characteristics
5.
Electrical Characteristics
Absolute Maximum Ratings (1)
Table 5.1
Symbol VCC1, VCC2 Supply voltage VCC2 AVCC VI Supply voltage
Characteristic
Condition VCC1 = AVCC -- VCC1 = AVCC
Value (2) -0.3 to 6.0 -0.3 to VCC1 -0.3 to 6.0
Unit V V V
Analog supply voltage Input voltage XIN, RESET, CNVSS, NSD, VREF, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (3) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (3) P7_0, P7_1
-0.3 to VCC1 +0.3
V
-0.3 to VCC2 +0.3 -0.3 to 6.0 -0.3 to VCC1 +0.3
V V V
VO
Output voltage
XOUT, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (3) P7_0, P7_1
-0.3 to VCC2 +0.3 -0.3 to 6.0 Ta = 25C 500 -40 to 85 -65 to 150
V V mW C C
Pd -- Tstg
Power consumption Operating temperature range Storage temperature range
Notes: 1. Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. 3. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 60 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.2
Operating Conditions (1) (1)
Symbol VCC1, VCC2 AVCC VREF VSS AVSS VIH
Characteristic Digital supply voltage (VCC1 VCC2) Analog supply voltage Reference voltage Digital ground voltage Analog ground voltage
Value (2) Min. 3.0 Typ. 5.0
VCC1
Max. 5.5
Unit V V
3.0 0 0 0.05 0.8 x VCC2 0.8 x VCC1 0.8 x VCC1 0.8 x VCC2
VCC1
V V V V/ms
dVCC1/dt VCC1 ramp up rate (VCC1 < 2.0 V) High level input voltage P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (4) XIN, RESET, CNVSS, NSD, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7 (3), P9_1, P9_3 to P9_7, P10_0 to P10_7 (4) P7_0, P7_1 P0_0 to P0_7, P1_0 to P1_7 (in single-chip mode) (4)
VCC2 VCC1 6.0 VCC2 VCC2 0.2 x VCC2 0.2 x VCC1 0.2 x VCC2 0.16 x VCC2 85 85
V
V V V V V
P0_0 to P0_7, P1_0 to P1_7 (in memory 0.5 x VCC2 expansion mode or microprocessor mode) (4, 5) VIL Low level input voltage P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (4) XIN, RESET, CNVSS, NSD, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7 (3), P9_1, P9_3 to P9_7, P10_0 to P10_7 (4) P0_0 to P0_7, P1_0 to P1_7 (in single-chip mode) (4) P0_0 to P0_7, P1_0 to P1_7 (in memory expansion mode or microprocessor mode) (4, 5) Topr Operating Version N temperature Version D range 0
0
V
0 0 -20 -40
V V C C
Notes: 1. The device is operationally guaranteed under these operating conditions. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. 3. VIH and VIL for P8_7 are specified for P8_7 as a programmable port. These values are not applicable to P8_7 as XCIN. 4. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only. 5. Memory expansion mode and microprocessor mode are available in the 100-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 61 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.3
Operating Conditions (2) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1)
Symbol CVDC
Characteristic Decoupling capacitance for voltage regulator Inter-pin voltage: 1.5 V
Value (2) Min. Typ. Max. 2.4 10.0
Unit F
Notes: 1. The device is operationally guaranteed under these operating conditions. 2. This value should be satisfied with due consideration of every condition as follows: operating temperature, DC bias, aging, etc.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 62 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.4
Operating Conditions (3) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1)
Symbol
Characteristic
Value Min. Typ. Max.
Unit
IOH(peak) High level P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, peak output P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, current (2) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) IOH(avg) High level average output current (4) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3)
-10.0
mA
-5.0
mA
IOL(peak) Low level P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, peak output P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, current (2) P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) IOL(avg) Low level average output current (4) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3)
10.0
mA
5.0
mA
Notes: 1. The device is operationally guaranteed under these operating conditions. 2. The following conditions should be satisfied: * The sum of IOL(peak) of ports P0, P1, P2, P8_6, P8_7, P9, and P10 is 80 mA or less. * The sum of IOL(peak) of ports P3, P4, P5, P6, P7, and P8_0 to P8_4 is 80 mA or less. * The sum of IOH(peak) of ports P0, P1, and P2 is -40 mA or less. * The sum of IOH(peak) of ports P8_6, P8_7, P9, and P10 is -40 mA or less. * The sum of IOH(peak) of ports P3, P4, and P5 is -40 mA or less. * The sum of IOH(peak) of ports P6, P7, and P8_0 to P8_4 is -40 mA or less. 3. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 4. Average value within 100 ms.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 63 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.5
Operating Conditions (4) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1)
Symbol f(XIN) f(XRef) f(PLL) f(Base) tc(Base) f(CPU) tc(CPU) f(BCLK) tc(BCLK) f(PER) f(XCIN)
Characteristic Main clock oscillator frequency Reference clock frequency PLL clock oscillator frequency Base clock frequency Base clock cycle time CPU operating frequency CPU clock cycle time Peripheral bus clock operating frequency Peripheral bus clock cycle time Peripheral clock source frequency Sub clock oscillator frequency
Value Min. 4 2 96 Typ. Max. 16 4 128 50 20 50 20 25 40 32 32.768 62.5
Unit MHz MHz MHz MHz ns MHz ns MHz ns MHz kHz
Note: 1. The device is operationally guaranteed under these operating conditions.
t c(Base)
Base clock (Internal signal)
t c(CPU)
CPU clock (Internal signal)
t c(BCLK)
Peripheral bus clock (Internal signal)
Figure 5.1
Clock Cycle Time
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 64 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.6
Operating Conditions (5) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1)
Symbol Vr(VCC1) Vr(VCC2) Allowable ripple voltage
Characteristic VCC1 = 5.0 V VCC1 = 3.0 V Allowable ripple voltage VCC2 = 5.0 V VCC2 = 3.0 V VCC1 = 5.0 V VCC1 = 3.0 V VCC2 = 5.0 V VCC2 = 3.0 V
Value Min. Typ. Max. 0.5 0.3 0.5 0.3 0.3 0.3 0.3 0.3 10 10
Unit Vp-p Vp-p Vp-p Vp-p V/ms V/ms V/ms V/ms kHz kHz
dVr(VCC1)/dt Ripple voltage gradient dVr(VCC2)/dt Ripple voltage gradient fr(VCC1) fr(VCC2) Allowable ripple frequency Allowable ripple frequency
Note: 1. The device is operationally guaranteed under these operating conditions.
1 / f r(VCC1)
or
1 / f r(VCC2)
VCC1 or VCC2
Vr(VCC1) or Vr(VCC2)
Figure 5.2
Ripple Waveform
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 65 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.7
RAM Electrical Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol VRDR
Characteristic RAM data retention voltage (1)
Measurement condition in stop mode
Value Min. 2.0 Typ. Max.
Unit V
Note: 1. The value listed in the table is the minimum VCC1 to retain RAM data.
Table 5.8
Flash Memory Electrical Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol -- -- --
Characteristic Programming and erasure endurance of flash Program area memory (1) Data area 4-word program time Lock bit-program time Block erasure time Program area Data area Program area Data area 4 Kbyte block 32 Kbyte block 64 Kbyte block Data retention (2) Ta = 55C (3)
Value Min. 1000 10000 150 300 70 140 0.12 0.17 0.20 10 900 1700 500 1000 3.0 3.0 3.0 Typ. Max.
Unit times times s s s s s s s years
-- --
Notes: 1. Program/erase definition This value represents the number of erasures per block. If the flash memory is programmed/erased n times, each block can be erased n times. i.e. If 4-word write is performed in 512 different addresses in the block A of 4 Kbyte and then the block is erased, it is considered the programming/erasure is performed just once. However a write in the same address more than once for one erasure is disabled. (overwrite disabled). 2. The data retention time includes the periods when the supply voltage is not applied and no clock is provided. 3. Please contact a Renesas sales office regarding data retention time other than the above.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 66 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.9
Power Supply Circuit Timing Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol td(P-R)
Characteristic Internal power supply start-up stabilization time after the main power supply is turned on
Measurement condition
Value Min. Typ. Max. 2
Unit ms
t d(P-R) Internal power supply start-up stabilization time after the main power supply is turned on
VCC1
Recommended operating voltage t d(P-R)
Supply voltage for internal logic PLL oscillatoroutput waveform
Figure 5.3
Power Supply Circuit Timing
Table 5.10
Electrical Characteristics of Voltage Regulator for Internal Logic (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol VVDC1
Characteristics Output voltage
Measurement condition
Value Min. Typ. 1.5 Max.
Unit V
Table 5.11
Electrical Characteristics of Low Voltage Detector (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol
Vdet
Characteristics Detected voltage error
Measurement condition
Value Min. 0 Typ. Max. 0.3
Unit V V
Vdet(R)-Vdet(F) Hysteresis width -- td(E-A) Self-consuming current VCC1 = 5.0 V, low voltage detector enabled
4 150
A s
Operation start time of low voltage detector
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 67 of 99
R32C/111 Group
5. Electrical Characteristics
Table 5.12
Electrical Characteristics of Oscillator (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol fSO(PLL) tLOCK(PLL) tjitter(p-p) f(OCO)
Characteristics PLL clock self-oscillation frequency PLL lock time (1) PLL jitter period (p-p) On-chip oscillator frequency
Measurement condition
Value Min. 35 Typ. 55 Max. 80 1 2.0 62.5 125 250
Unit MHz ms ns kHz
Note: 1. This value is applicable only when the main clock oscillation is stable.
Table 5.13
Electrical Characteristics of Clock Circuitry (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol trec(STOP) trec(WAIT)
Characteristics Recovery time from stop mode (1)
Measurement condition
Value Min. Typ. Max. 225 225
Unit s s
Recovery time from wait mode to low power mode
Note: 1. This recovery time does not include the period until the main clock oscillator is stabilized. The CPU starts operating before the oscillator is stabilized.
t rec(STOP) Recovery time from stop mode
Interrupt for exiting stop mode Main clock oscillator output On-chip oscillator output CPU clock t rec(STOP)
t rec(WAIT) Recovery time from wait mode to low power mode
Interrupt for exiting wait mode Sub clock oscillator output On-chip oscillator output CPU clock t rec(WAIT)
Figure 5.4
Clock Circuit Timing
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 68 of 99
R32C/111 Group
5. Electrical Characteristics
Timing Requirements (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.14 Flash Memory CPU Rewrite Mode Timing
Symbol tcR tsu(S-R) th(R-S) tsu(A-R) th(R-A) tw(R) tcW tsu(S-W) th(W-S) tsu(A-W) th(W-A) tw(W) Read cycle time
Characteristics
Value Min. 200 200 0 200 0 100 200 0 30 0 30 50 Max.
Unit ns ns ns ns ns ns ns ns ns ns ns ns
Chip-select setup time for read Chip-select hold time after read Address setup time for read Address hold time after read Read pulse width Write cycle time Chip-select setup time for write Chip-select hold time after write Address setup time for write Address hold time after write Write pulse width
Read cycle
t su(S-R) CS0 t su(A-R) A23 to A0, BC0 to BC3
t cR t h(R-S)
t h(R-A)
t w(R) RD
Write cycle
t su(S-W) CS0 to CS3 t su(A-W) A23 to A0, BC0 to BC3
t cW t h(W-S)
t h(W-A)
t w(W) WR
Figure 5.5
Flash Memory CPU Rewrite Mode Timing
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 69 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Table 5.15 Electrical Characteristics (1) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted)
Symbol VOH High level output voltage
Characteristic P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7
(1)
Measurement condition IOH = -5 mA
Value (2) Min. VCC2 -2.0 Typ. Max. VCC2
Unit
V
IOH = -5 mA
VCC1 -2.0
VCC1
V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, IOH = -200 A VCC2 -0.3 P5_0 to P5_7 (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 IOH = -200 A VCC1 -0.3
(1)
VCC2
V
VCC1
V
VOL
Low level output voltage
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7
(1)
IOL = 5 mA
2.0
V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7
(1)
IOL = 200 A
0.45
V
Notes: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 70 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Table 5.16 Electrical Characteristics (2) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted)
Symbol
Characteristic
Value Measurement Unit condition Min. Typ. Max.
VT+ - VT- Hysteresis HOLD, RDY, NMI, INT0 to INT5, KI0 to KI3, TA0IN to TA4IN, TA0OUT to TA4OUT, TB0IN to TB5IN, CTS0 to CTS8, CLK0 to CLK8, RXD0 to RXD8, SCL0 to SCL6, SDA0 to SDA6, SS0 to SS6, SRXD0 to SRXD6, ADTRG, IIO0_0 to IIO0_7, IIO1_0 to IIO1_7, UD0A, UD0B, UD1A, UD1B, ISCLK2, ISRXD2, IEIN(1)
RESET
0.2
1.0
V
0.2
1.8
V
IIH
High level XIN, RESET, CNVSS, NSD, input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, current P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) Low level input current XIN, RESET, CNVSS, NSD, P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2)
VI = 5 V
5.0
A
IIL
VI = 0 V
-5.0
A
RPULLUP Pull-up resistor
VI = 0 V
30
50
170
k
RfXIN RfXCIN
Feedback XIN resistor Feedback XCIN resistor
1.5 15
M M
Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, STXD4, and SRXD4 are available in the 100- and 80-pin package only. Pins TB4IN, CTS4, RTS4, SS4, UART6, and UART7 are available in the 100-pin package only. 2. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 71 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Table 5.17 Electrical Characteristics (3) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol
ICC
Characte ristic
Power supply current
Measurement condition
In single-chip mode, output pins are left open and others are connected to VSS XIN-XOUT Drive power: low XCIN-XCOUT Drive power: low f(CPU) = 50 MHz, f(BCLK) = 25 MHz, f(XIN) = 8 MHz, Active: XIN, PLL, Stopped: XCIN, OCO f(CPU) = fSO(PLL)/24 MHz, Active: PLL (self-oscillation), Stopped: XIN, XCIN, OCO f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO, Ta = 25C, Wait mode f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown, Ta = 25C, Wait mode f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown, Ta = 25C, Wait mode Stopped: all clocks, Main regulator: shutdown, Ta = 25C
Value Min. Typ. Max.
Unit
32
45
mA
10
mA
1.2
mA
220
A
230
A
960
1600
A
8
140
A
10
150
A
5
70
A
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 72 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Table 5.18 A/D Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 4.2 to 5.5 V, VSS = AVSS = 0 V, Ta = Topr, and f(BCLK) = 25 MHz, unless otherwise noted)
Symbol --
Characteristic Resolution Absolute error
Measurement condition VREF = VCC1 VREF = VCC1 = VCC2 AN_0 to AN_7, AN0_0 to AN0_7, =5V AN2_0 to AN2_7, ANEX0, ANEX1 (1) External op-amp connection mode
Value Min. Typ. Max. 10
Unit Bits
3
LSB
--
7
LSB
INL
Integral non-linearity error
VREF = VCC1 = VCC2 AN_0 to AN_7, AN0_0 to AN0_7, =5V AN2_0 to AN2_7, ANEX0, ANEX1 (1) External op-amp connection mode
3
LSB
7 1 3 3
LSB LSB LSB LSB k s s s s s
DNL -- -- RLADDER tCONV
Differential non-linearity error Offset error Gain error Resistor ladder Conversion time (10 bits) VREF = VCC1
AD = 16 MHz, with sample and hold function AD = 16 MHz, without sample and hold function
4 2.06 3.69 1.75 3.06 0.188 0
20
tCONV
Conversion time (8 bits)
AD = 16 MHz, with sample and hold function AD = 16 MHz, without sample and hold function
tSAMP VIA
AD
Sample time Analog input voltage Operating clock frequency
AD = 16 MHz
VREF 16 16
V MHz MHz
without sample and hold function with sample and hold function
0.25 1
Note: 1. Pins AN0_4 to AN0_7, ANEX0, and ANEX1 are available in the 100- and 80-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 73 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Table 5.19 D/A Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 4.2 to 5.5 V, VSS = AVSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol -- -- tS RO IVREF
Characteristic Resolution Absolute precision Settling time Output resistance Reference input current
Measurement condition
Value Min. Typ. Max. 8 1.0 3 4 10 20 1.5
Unit Bits % s k mA
(1)
Note: 1. One D/A converter is used. The DAi register (i = 0, 1) of the other unused converter is set to 00h. The resistor ladder for A/D converter is not considered. Even when the VCUT bit in the AD0CON1 register is set to 0 (VREF disconnected), IVREF is supplied.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 74 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.20 External Clock Input
Symbol tc(X) tw(XH) tw(XL) tr(X) tf(X) tw / tc
Characteristic External clock input period External clock input high level pulse width External clock input low level pulse width External clock input rise time External clock input fall time External clock input duty
Value Min. 62.5 25 25 5 5 40 60 Max. 250
Unit ns ns ns ns ns %
Table 5.21
External Bus Timing
Symbol tsu(D-R) th(R-D) tdis(R-D)
Characteristic Data setup time for read Data hold time after read Data disable time after read
Value Min. 40 0 0.5 x tc(Base) + 10 Max.
Unit ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 75 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.22 Timer A Input (Counting input in event counter mode)
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.23
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Timer A Input (Gating input in timer mode)
Value Min. 200 80 80 Max.
Unit ns ns ns
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.24
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Timer A Input (External trigger input in one-shot timer mode)
Value Min. 400 180 180 Max.
Unit ns ns ns
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.25
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Value Min. 200 80 80 Max.
Unit ns ns ns
Timer A Input (External trigger input in pulse-width modulation mode)
Symbol tw(TAH) tw(TAL)
Table 5.26
Characteristic TAiIN input high level pulse width TAiIN input low level pulse width
Value Min. 80 80 Max.
Unit ns ns
Timer A Input (Increment/decrement count switching input in event counter mode)
Symbol tc(UP) tw(UPH) tw(UPL) tsu(UP-TIN) th(TIN-UP)
Characteristic TAiOUT input clock period TAiOUT input high level pulse width TAiOUT input low level pulse width TAiOUT input setup time TAiOUT input hold time
Value Min. 2000 1000 1000 400 400 Max.
Unit ns ns ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 76 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.27 Timer B Input (Counting input in event counter mode)
Symbol tc(TB) tw(TBH) tw(TBL) tc(TB) tw(TBH) tw(TBL)
Table 5.28
Characteristic TBiIN input clock period (one edge counting) TBiIN input high level pulse width (one edge counting) TBiIN input low level pulse width (one edge counting) TBiIN input clock period (both edges counting) TBiIN input high level pulse width (both edges counting) TBiIN input low level pulse width (both edges counting)
Timer B Input (Pulse period measure mode)
Value Min. 200 80 80 200 80 80 Max.
Unit ns ns ns ns ns ns
Symbol tc(TB) tw(TBH) tw(TBL)
Table 5.29
Characteristic TBiIN input clock period TBiIN input high level pulse width TBiIN input low level pulse width
Timer B Input (Pulse-width measure mode)
Value Min. 400 180 180 Max.
Unit ns ns ns
Symbol tc(TB) tw(TBH) tw(TBL)
Characteristic TBiIN input clock period TBiIN input high level pulse width TBiIN input low level pulse width
Value Min. 400 180 180 Max.
Unit ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 77 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Timing requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.30 Serial Interface
Symbol tc(CK) tw(CKH) tw(CKL) tsu(D-C) th(C-D) CLKi input clock period
Characteristic
Value Min. 200 80 80 80 90 Max.
Unit ns ns ns ns ns
CLKi input high level pulse width CLKi input low level pulse width RXDi input setup time RXDi input hold time
Table 5.31
A/D Trigger Input
Symbol tw(ADH) tw(ADL)
Characteristic
ADTRG input high level pulse width Hardware trigger input high level pulse width ADTRG input low level pulse width Hardware trigger input high level pulse width
Value Min.
3-------- AD
Max.
Unit ns ns
125
Table 5.32
External Interrupt INTi Input
Symbol tw(INH)
Characteristic
INTi input high level pulse width INTi input low level pulse width
Value Min. Edge sensitive Level sensitive 250 tc(CPU) + 200 250 tc(CPU) + 200 Max.
Unit ns ns ns ns
tw(INL)
Edge sensitive Level sensitive
Table 5.33
Intelligent I/O
Symbol tc(ISCLK2) tw(ISCLK2H) tw(ISCLK2L) tsu(RXD-ISCLK2) th(ISCLK2-RXD)
Characteristic ISCLK2 input clock period ISCLK2 input high level pulse width ISCLK2 input low level pulse width ISRXD2 input setup time ISRXD2 input hold time
Value Min. 600 270 270 150 100 Max.
Unit ns ns ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 78 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.34 External Bus Timing (Separate bus)
Symbol tsu(S-R) th(R-S) tsu(A-R) th(R-A) tw(R) tsu(S-W) th(W-S) tsu(A-W) th(W-A) tw(W) tsu(D-W) th(W-D)
Characteristic Chip-select setup time for read Chip-select hold time after read Address setup time for read Address hold time after read Read pulse width Chip-select setup time for write Chip-select hold time after write Address setup time for write Address hold time after write Write pulse width Data setup time for write Data hold time after write
Measurement condition
Value Min.
(1)
Max.
Unit ns ns ns ns ns ns ns ns ns ns ns ns
tc(Base) - 10
(1)
tc(Base) - 10
(1)
Refer to Figure 5.6
(1)
1.5 x tc(Base) - 10
(1)
1.5 x tc(Base) - 10
(1) (1)
0
Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-R) = tsu(A-R) = Tsu(A-R) x tc(Base) - 15 [ns] tw(R) = Tw(R) x tc(Base) - 10 [ns] tsu(S-W) = tsu(A-W) = Tsu(A-W) x tc(Base) - 15 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) - 10 [ns]
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 79 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and unless otherwise noted) Table 5.35 External Bus Timing (Multiplexed bus)
Symbol tsu(S-ALE) th(R-S) tsu(A-ALE) th(ALE-A) th(R-A) td(ALE-R) tw(ALE) tdis(R-A) tw(R) th(W-S) th(W-A) td(ALE-W) tw(W) tsu(D-W) th(W-D)
Characteristic Chip-select setup time for ALE Chip-select hold time after read Address setup time for ALE Address hold time after ALE Address hold time after read ALE-read delay time ALE pulse width Address disable time after read Read pulse width Chip-select hold time after write Address hold time after write ALE-write delay time Write pulse width Data setup time for write Data hold time after write
Measurement condition
Value Min.
(1)
Max.
Unit ns ns ns ns ns
1.5 x tc(Base) - 10
(1)
0.5 x tc(Base) - 5 1.5 x tc(Base) - 10
(1)
0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns ns 8
(1)
Refer to Figure 5.6 1.5 x tc(Base) - 10 1.5 x tc(Base) - 10
(1) (1)
ns ns ns ns
0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns ns ns ns
0.5 x tc(Base)
Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-ALE) = tsu(A-ALE) = tw(ALE) = (Tsu(A-R) - 0.5) x tc(Base) -15 [ns] tw(R) = Tw(R) x tc(Base) -10 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) -10 [ns]
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 80 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 5 V
Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.36 Serial Interface
Symbol td(C-Q) th(C-Q)
Characteristic TXDi output delay time TXDi output hold time
Measurement condition Refer to Figure 5.6
Value Min. Max. 80 0
Unit ns ns
Table 5.37
Intelligent I/O
Symbol td(ISCLK2-TXD) th(ISCLK2-RXD)
Characteristic ISTXD2 output delay time ISTXD2 output hold time
Value Min. Max. 180 0
Unit ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 81 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.38 Electrical Characteristics (1) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted)
Symbol VOH High level output voltage
Characteristic P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7
(1)
Measurement condition IOH = -1 mA
Value (2) Min. VCC2 0.6 VCC1 0.6 Typ. Max. VCC2
Unit
V
IOH = -1 mA
VCC1
V
VOL
Low level output voltage
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7
(1)
IOL = 1 mA
0.5
V
Notes: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 82 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.39 Electrical Characteristics (2) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted)
Symbol
Characteristic
Value Measurement Unit condition Min. Typ. Max.
VT+ - VT- Hysteresis HOLD, RDY, NMI, INT0 to INT5, KI0 to KI3, TA0IN to TA4IN, TA0OUT to TA4OUT, TB0IN to TB5IN, CTS0 to CTS8, CLK0 to CLK8, RXD0 to RXD8, SCL0 to SCL6, SDA0 to SDA6, SS0 to SS6, SRXD0 to SRXD6, ADTRG, IIO0_0 to IIO0_7, IIO1_0 to IIO1_7, UD0A, UD0B, UD1A, UD1B, ISCLK2, ISRXD2, IEIN(1) RESET High level XIN, RESET, CNVSS, NSD, IIH input P0_0 to P0_7, P1_0 to P1_7, current P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) Low level XIN, RESET, CNVSS, NSD, IIL input P0_0 to P0_7, P1_0 to P1_7, current P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) P0_0 to P0_7, P1_0 to P1_7, RPULLUP Pull-up resistor P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) RfXIN Feedback XIN resistor RfXCIN Feedback XCIN resistor
0.2
1.0
V
0.2
1.8
V
VI = 3.3 V
4.0
A
VI = 0 V
-4.0
A
VI = 0 V
50
100
500
k
3 25
M M
Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, STXD4, and SRXD4 are available in the 100- and 80-pin package only. Pins TB4IN, CTS4, RTS4, SS4, UART6, and UART7 are available in the 100-pin package only. 2. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 83 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.40 Electrical Characteristics (3) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol
ICC
Characte ristic
Power supply current
Measurement condition
In single-chip mode, output pins are left open and others are connected to VSS XIN-XOUT Drive power: low XCIN-XCOUT Drive power: low f(CPU) = 50 MHz, f(BCLK) = 25 MHz, f(XIN) = 8 MHz, Active: XIN, PLL, Stopped: XCIN, OCO f(CPU) = fSO(PLL)/24 MHz, Active: PLL (self-oscillation), Stopped: XIN, XCIN, OCO f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO, Ta = 25C, Wait mode f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown, Ta = 25C, Wait mode f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown, Ta = 25C, Wait mode Stopped: all clocks, Main regulator: shutdown, Ta = 25C
Value Min. Typ. Max.
Unit
28
40
mA
7
mA
670
A
180
A
190
A
500
900
A
8
140
A
10
150
A
5
70
A
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 84 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.41 A/D Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 3.0 to 3.6 V, VSS = AVSS = 0 V, Ta = Topr, and f(BCLK) = 25 MHz, unless otherwise noted)
Symbol --
Characteristic Resolution Absolute error
Measurement condition VREF = VCC1 VREF = VCC1 = VCC2 = 3.3 V AN_0 to AN_7, AN0_0 to AN0_7, AN2_0 to AN2_7, ANEX0, ANEX1 (1) External op-amp connection mode
Value Min. Typ. Max. 10
Unit Bits
5
LSB
--
7
LSB
INL
Integral non-linearity error
VREF = VCC1 = VCC2 = 3.3 V
AN_0 to AN_7, AN0_0 to AN0_7, AN2_0 to AN2_7, ANEX0, ANEX1 (1) External op-amp connection mode
5
LSB
7 1 3 3
LSB LSB LSB LSB k s s s
DNL -- -- RLADDER tCONV tCONV tSAMP VIA
AD
Differential nonlinearity error Offset error Gain error Resistor ladder Conversion time (10 bits) Conversion time (8 bits) Sampling time Analog input voltage Operating clock frequency
VREF = VCC1 = VCC2 = 3.3 V
VREF = VCC1
AD = 10 MHz, with sample and hold function AD = 10 MHz, with sample and hold function AD = 10 MHz
4 3.3 2.8 0.3 0
20
VREF 10 10
V MHz MHz
without sample and hold function with sample and hold function
0.25 1
Note: 1. Pins AN0_4 to AN0_7, ANEX0, and ANEX1 are available in the 100- and 80-pin package only.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 85 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.42 D/A Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 3.0 to 3.6 V, VSS = AVSS = 0 V, and Ta = Topr, unless otherwise noted)
Symbol -- -- tS RO IVREF
Characteristic Resolution Absolute precision Settling time Output resistance Reference input current
Measurement condition Min.
Value Typ. Max. 8 1.0 3 4 10 20 1.0
Unit Bits % s k mA
(1)
Note: 1. One D/A converter is used. The DAi register (i = 0, 1) of the other unused converter is set to 00h. The resistor ladder for A/D converter is not considered. Even when the VCUT bit in the AD0CON1 register is set to 0 (VREF disconnected), IVREF is supplied.
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 86 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.43 External Clock Input
Symbol tc(X) tw(XH) tw(XL) tr(X) tf(X) tw / tc
Characteristic External clock input period External clock input high level pulse width External clock input low level pulse width External clock input rise time External clock input fall time External clock input duty
Value Min. 62.5 25 25 5 5 40 60 Max. 250
Unit ns ns ns ns ns %
Table 5.44
External Bus Timing
Symbol tsu(D-R) th(R-D) tdis(R-D)
Characteristic Data setup time for read Data hold time after read Data disable time after read
Value Min. 40 0 0.5 x tc(Base) + 10 Max.
Unit ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 87 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.45 Timer A Input (Counting input in event counter mode)
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.46
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Timer A Input (Gating input in timer mode)
Value Min. 200 80 80 Max.
Unit ns ns ns
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.47
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Timer A Input (External trigger input in one-shot timer mode)
Value Min. 400 180 180 Max.
Unit ns ns ns
Symbol tc(TA) tw(TAH) tw(TAL)
Table 5.48
Characteristic TAiIN input clock period TAiIN input high level pulse width TAiIN input low level pulse width
Value Min. 200 80 80 Max.
Unit ns ns ns
Timer A Input (External trigger input in pulse-width modulation mode)
Symbol tw(TAH) tw(TAL)
Table 5.49
Characteristic TAiIN input high level pulse width TAiIN input low level pulse width
Value Min. 80 80 Max.
Unit ns ns
Timer A Input (Increment/decrement count switching input in event counter mode)
Symbol tc(UP) tw(UPH) tw(UPL) tsu(UP-TIN) th(TIN-UP)
Characteristic TAiOUT input clock period TAiOUT input high level pulse width TAiOUT input low level pulse width TAiOUT input setup time TAiOUT input hold time
Value Min. 2000 1000 1000 400 400 Max.
Unit ns ns ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 88 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.50 Timer B Input (Counting input in event counter mode)
Symbol tc(TB) tw(TBH) tw(TBL) tc(TB) tw(TBH) tw(TBL)
Table 5.51
Characteristic TBiIN input clock period (one edge counting) TBiIN input high level pulse width (one edge counting) TBiIN input low level pulse width (one edge counting) TBiIN input clock period (both edges counting) TBiIN input high level pulse width (both edges counting) TBiIN input low level pulse width (both edges counting)
Timer B Input (Pulse period measure mode)
Value Min. 200 80 80 200 80 80 Max.
Unit ns ns ns ns ns ns
Symbol tc(TB) tw(TBH) tw(TBL)
Table 5.52
Characteristic TBiIN input clock period TBiIN input high level pulse width TBiIN input low level pulse width
Timer B Input (Pulse-width measure mode)
Value Min. 400 180 180 Max.
Unit ns ns ns
Symbol tc(TB) tw(TBH) tw(TBL)
Characteristic TBiIN input clock period TBiIN input high level pulse width TBiIN input low level pulse width
Value Min. 400 180 180 Max.
Unit ns ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 89 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.53 Serial Interface
Symbol tc(CK) tw(CKH) tw(CKL) tsu(D-C) th(C-D) CLKi input clock period
Characteristic
Value Min. 200 80 80 80 90 Max.
Unit ns ns ns ns ns
CLKi input high level pulse width CLKi input low level pulse width RXDi input setup time RXDi input hold time
Table 5.54
A/D Trigger Input
Symbol tw(ADH) tw(ADL)
Characteristic
ADTRG input high level pulse width Hardware trigger input high level pulse width ADTRG input low level pulse width Hardware trigger input high level pulse width
Value Min.
3-------- AD
Max.
Unit ns ns
125
Table 5.55
External Interrupt INTi Input
Symbol tw(INH)
Characteristic
INTi input high level pulse width INTi input low level pulse width
Value Min. Edge sensitive Level sensitive 250 tc(CPU) + 200 250 tc(CPU) + 200 Max.
Unit ns ns ns ns
tw(INL)
Edge sensitive Level sensitive
Table 5.56
Intelligent I/O
Symbol tc(ISCLK2) tw(ISCLK2H) tw(ISCLK2L)
Characteristic ISCLK2 input clock period ISCLK2 input high level pulse width ISCLK2 input low level pulse width
Value Min. 600 270 270 150 100 Max.
Unit ns ns ns ns ns
tsu(RXD-ISCLK2) ISRXD2 input setup time th(ISCLK2-RXD) ISRXD2 input hold time
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 90 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.57 External Bus Timing (Separate bus)
Symbol tsu(S-R) th(R-S) tsu(A-R) th(R-A) tw(R) tsu(S-W) th(W-S) tsu(A-W) th(W-A) tw(W) tsu(D-W) th(W-D)
Characteristic Chip-select setup time for read Chip-select hold time after read Address setup time for read Address hold time after read Read pulse width Chip-select setup time for write Chip-select hold time after write Address setup time for write Address hold time after write Write pulse width Data setup time for write Data hold time after write
Measurement condition
Value Min.
(1)
Max.
Unit ns ns ns ns ns ns ns ns ns ns ns ns
tc(Base) - 10
(1)
tc(Base) - 10
(1) (1)
Refer to Figure 5.6
1.5 x tc(Base) - 10
(1)
1.5 x tc(Base) - 10
(1) (1)
0
Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-R) = tsu(A-R) = Tsu(A-R) x tc(Base) - 15 [ns] tw(R) = Tw(R) x tc(Base) - 10 [ns] tsu(S-W) = tsu(A-W) = Tsu(A-W) x tc(Base) - 15 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) - 10 [ns]
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 91 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.58 External Bus Timing (Multiplexed bus)
Symbol tsu(S-ALE) th(R-S) tsu(A-ALE) th(ALE-A) th(R-A) td(ALE-R) tw(ALE) tdis(R-A) tw(R) th(W-S) th(W-A) td(ALE-W) tw(W) tsu(D-W) th(W-D)
Characteristic Chip-select setup time for ALE Chip-select hold time after read Address setup time for ALE Address hold time after ALE Address hold time after read ALE-read delay time ALE pulse width Address disable time after read Read pulse width Chip-select hold time after write Address hold time after write ALE-write delay time Write pulse width Data setup time for write Data hold time after write
Measurement condition
Value Min.
(1)
Max.
Unit ns ns ns ns ns
1.5 x tc(Base) - 10
(1)
0.5 x tc(Base) - 5 1.5 x tc(Base) - 10
0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns
(1)
ns 8 ns ns ns ns
Refer to Figure 5.6
(1)
1.5 x tc(Base) - 10 1.5 x tc(Base) - 10
(1) (1)
0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns ns ns ns
0.5 x tc(Base)
Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-ALE) = tsu(A-ALE) = tw(ALE) = (Tsu(A-R) - 0.5) x tc(Base) -15 [ns] tw(R) = Tw(R) x tc(Base) -10 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) -10 [ns]
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 92 of 99
R32C/111 Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.59 Serial Interface
Symbol td(C-Q) th(C-Q)
Characteristic TXDi output delay time TXDi output hold time
Measurement condition Refer to Figure 5.6
Value Min. Max. 80 0
Unit ns ns
Table 5.60
Intelligent I/O
Symbol td(ISCLK2-TXD) th(ISCLK2-RXD)
Characteristic ISTXD2 output delay time ISTXD2 output hold time
Value Min. Max. 180 0
Unit ns ns
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 93 of 99
R32C/111 Group
5. Electrical Characteristics
MCU
Pin to be measured
30 pF
Figure 5.6
Switching Characteristic Measurement Circuit
t c(X)
XIN
t w(XH) t r(X) t f(X) t w(XL)
Figure 5.7
External Clock Input Timing
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 94 of 99
R32C/111 Group
5. Electrical Characteristics
External bus timing (Separate bus) Read cycle
t su(S-R) CS0 to CS3 t su(A-R) A23 to A0, BC0 and BC1 t w(R) RD t su(D-R) D15 to D0 t h(R-D) t h(R-A)
t cR t h(R-S)
Write cycle
t su(S-W) CS0 to CS3 t su(A-W) A23 to A0, BC0 and BC1
t cW t h(W-S)
t h(W-A)
t w(W) WR, WR0 and WR1 t su(D-W) D15 to D0 t h(W-D)
Measurement conditions Item Criterion for input voltage Criterion for output voltage VIH VIL VOH VOL VCC1 = VCC2 = 4.2 to 5.5 V 2.5 V 0.8 V 2.0 V 0.8 V VCC1 = VCC2 = 3.0 to 3.6 V 1.5 V 0.5 V 2.4 V 0.5 V
Figure 5.8
External Bus Timing (Separate Bus)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 95 of 99
R32C/111 Group
5. Electrical Characteristics
External bus timing (Multiplexed bus) Read cycle
t su(S-ALE) CS0 to CS3 t su(A-ALE) A23 to A8, BC0 and BC1 t w(ALE) ALE t su(A-ALE) A15/D15 to A0/D0, BC0/D0 Address t d(ALE-R) RD t su(D-R) D15 to D8 t h(R-D) t w(R) t dis(R-A) t su(D-R) Data t dis(R-D) t h(R-D) t h(ALE-A) t h(R-A) t cR t h(R-S)
Write cycle
t su(S-ALE) CS0 to CS3 t su(A-ALE) A23 to A8, BC0 and BC1 t w(ALE) ALE t su(A-ALE) A15/D15 to A0/D0, BC0/D0 t h(ALE-A)
t cW t h(W-S)
t h(W-A)
t su(D-W) Data t w(W)
t h(W-D)
Address t d(ALE-W)
WR, WR0 and WR1 t su(D-W) D15 to D8 t h(W-D)
Measurement conditions Item Criterion for input voltage Criterion for output voltage VIH VIL VOH VOL VCC1 = VCC2 = 4.2 to 5.5 V 2.5 V 0.8 V 2.0 V 0.8 V VCC1 = VCC2 = 3.0 to 3.6 V 1.5 V 0.5 V 2.4 V 0.5 V
Figure 5.9
External Bus Timing (Multiplexed Bus)
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 96 of 99
R32C/111 Group
5. Electrical Characteristics
t c(TA) t w(TAH) TAiIN input t c(UP) t w(UPH) TAiOUT input t w(UPL) t w(TAL)
In event counter mode TAiOUT input (input for increment/ decrement count switching) t su(UP-TIN) TAiIN input (in falling edge counting) t h(TIN-UP)
TAiIN input (in rising edge counting) t c(TB) t w(TBH) TBiIN input t c(CK) t w(CKH) CLKi t d(C-Q) TXDi t su(D-C) RXDi t h(C-D) t h(C-Q) t w(CKL) t w(TBL)
t w(ADL) ADTRG input
t w(ADH)
t w(INL) INTi input
t w(INH)
2 CPU clock cycles + 300 ns or more NMI input
2 CPU clock cycles + 300 ns or more
Figure 5.10
Timing of Peripheral Functions
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 97 of 99
R32C/111 Group
Appendix 1. Package Dimensions
Appendix 1. Package Dimensions
JEITA Package Code P-LQFP100-14x14-0.50 RENESAS Code PLQP0100KB-A Previous Code 100P6Q-A / FP-100U / FP-100UV MASS[Typ.] 0.6g
HD *1 D
75
51 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET.
76
50
bp b1
HE
E
Reference Symbol
*2
Dimension in Millimeters
c1
c
Terminal cross section
1 Index mark ZD
25 F
ZE
100
26
A2
A
D E A2 HD HE A A1 bp b1 c c1
c
A1
y e
*3
bp
L L1 Detail F
x
e x y ZD ZE L L1
Min Nom Max 13.9 14.0 14.1 13.9 14.0 14.1 1.4 15.8 16.0 16.2 15.8 16.0 16.2 1.7 0.05 0.1 0.15 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 8 0.5 0.08 0.08 1.0 1.0 0.35 0.5 0.65 1.0
JEITA Package Code P-TFLGA100-5.5x5.5-0.5
RENESAS Code PTLG0100KA-A
Previous Code 100F0M
MASS[Typ.] 0.1g
D
b1 wSA b ZD
S
AB S AB
wSB
A
A
e
K J H G B F
E
E D C B A
e
ZE
Reference Symbol
Dimension in Millimeters
x4 v Index mark (Laser mark) S
yS
1
2
3
4
5
6
7
8
9
10
Index mark
D E v w A e b b1 x y ZD ZE
Nom Max 5.5 5.5 0.15 0.20 1.05 0.5 0.21 0.25 0.29 0.29 0.34 0.39 0.08 0.10 0.5 0.5
Min
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 98 of 99
R32C/111 Group
Appendix 1. Package Dimensions
JEITA Package Code P-LQFP80-12x12-0.50
RENESAS Code PLQP0080KB-A
Previous Code 80P6Q-A
MASS[Typ.] 0.5g
HD *1 D
60
41 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET.
61
40 bp b1
c1 *2 HE E
c
Reference Dimension in Millimeters Symbol
Terminal cross section
ZE
80
21
1 ZD Index mark
20
F
D E A2 HD HE A A1 bp b1 c c1 e x y ZD ZE L L1
y e
bp
A1
*3 x
L L1
Detail F
Min Nom Max 11.9 12.0 12.1 11.9 12.0 12.1 1.4 13.8 14.0 14.2 13.8 14.0 14.2 1.7 0.1 0.2 0 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 10 0.5 0.08 0.08 1.25 1.25 0.3 0.5 0.7 1.0
A2
A
JEITA Package Code P-LQFP64-10x10-0.50
RENESAS Code PLQP0064KB-A
Previous Code 64P6Q-A / FP-64K / FP-64KV
MASS[Typ.] 0.3g
HD *1 48 D 33 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. bp b1
49
32
HE
E
c
Reference Symbol
*2
c1
Dimension in Millimeters
c
64
1 Index mark ZD
16
ZE
17
Terminal cross section
F
D E A2 HD HE A A1 bp b1 c c1 e x y ZD ZE L L1
e
*3
A1
y bp x
L L1 Detail F
Min Nom Max 9.9 10.0 10.1 9.9 10.0 10.1 1.4 11.8 12.0 12.2 11.8 12.0 12.2 1.7 0.05 0.1 0.15 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 8 0.5 0.08 0.08 1.25 1.25 0.35 0.5 0.65 1.0
A2
REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 99 of 99
A
c
REVISION HISTORY
Rev. 0.03 0.30 Date Oct 17, 2007 Aug 19, 2008 Page -- -- --
R32C/111 Group Datasheet
Description Summary Initial release Second edition released The manual in general * Maximum operating frequency changed from 48 MHz to 50 MHz * Specification of on-chip oscillator disclosed * Microprocessor mode becomes optional * "memory-expanded mode" changed to "memory expansion mode" Chapter 1 * "(MCUs)" added to line 1 of 1.1 * Applications in 1.1.1 revised and modified * "Attention Users" below 1.1.1 modified to "Notes to users"; "The specification" in this box changed to "Specifications" * "instructions" in "CPU" of Table 1.1 deleted * Minimum instruction execution time in "CPU" of Table 1.1 changed * Microprocessor mode in CPU" of Table 1.1 changed to optional * "TBD" for "Voltage Detection" in Table 1.1 deleted * "3 circuits" for "Clock" in Table 1.1 changed to "4 circuits" * "Total interrupt vectors" in Table 1.1 changed to "Interrupt vectors" * Trigger sources" for DMA in Table 1.1 modified to "Request sources"; Request sources for "DMA" defined as 51 * Scribal error: "peripheral interrupt sources" for "DMACII" in Table 1.1 corrected to "peripheral interrupt source" * Unit names in Table 1.2 sorted in chapter order * Description for "A/D Converter" in Table 1.2 changed * "Operating frequency" in Table 1.2 changed from "48 MHz" to "50 MHz" * "version N" and "version D" added to "Operating Temperature" in Table 1.2; "optional" deleted * Values for "Current Consumption" in Table 1.2 added * "version N" and "version D" added to Table 1.3 * All "version N"s in Table 1.3 become on planning phase * Figure 1.2 modified * Note 2 for Figure 1.3 modified * Scribal error: "CLK5/" (pin No. 21) in Table 1.4 corrected to "CLK5" * Description for "Connecting pins for decoupling capacitor", "CNVSS", and "Debug port" in Table 1.7 modified * Some descriptions for "WR0/WR1/WR/BC0/BC1/RD" of "Bus control pins" in Table 1.8 modified * Functional category items in Tables 1.9 and 1.10 sorted in chapter order; Descriptions modified Chapter 2 * Descriptions for this chapter modified; Expression "DMAC-related registers"s modified to "DMAC-associated registers"s * "Data register" and "Address register" in Figure 2.1 pluralized; Explanation in Notes 1 and 2 for this figure revised
1
2
3
4 6 7 8 11 12 13, 14
-- 15
A- 1
REVISION HISTORY
Rev. Date Page 15, 16 18 19 20
R32C/111 Group Datasheet
Description Summary * "Interrupt table register" in Figure 2.1 and 2.1.6 changed to "Interrupt vector table base register" * Scribal error: "24 bit" in 2.2.2 corrected to "32 bit" Chapter 3 * Descriptions for this chapter and Figure 3.1 modified Chapter 4 * "(SFR)" of chapter title changed to "(SFRs)" * Description for initial paragraph of Chapter 4 modified * Reset value for CCR and PBC in Table 4.1 changed * "UARTi Bus Collision Detection Interrupt Control Register" (i = 0 to 6) in Tables 4.2 and 4.3 changed to "UARTi Bus Collision, Start/Stop Condition Detection Interrupt Control Register" * "DMAi interrupt" in Tables 4.2 and 4.3 changed to "DMAi transfer complete interrupt" * Reset value for IIO3IR and IIO8IR to IIO11R in Table 4.3 modified * Scribal error: address "00010Fh" added to Table 4.6 * "Upward/Downward Counting Select Register" in Table 4.13 changed to "Increment/Decrement Counting Select Register" * CSOP2 for address 040056h in Table 4.19 deleted * Reset value for CM3 in Table 4.19 changed * "DMAi Source Select Register i" in Table 4.24 changed to "DMAi Request Source Select Register i" Chapter 5 * This chapter newly added Appendix 1 * "Package Dimension" as title changed to "Package Dimensions" Third edition released The manual in general * Added 100-pin plastic molded LGA and 80- and 64-pin plastic molded LQFP packages * When new tables/figures are added for 80-/64-pin packages, add the following description: "(for the 100-pin package)" to the title of corresponding current tables/figures Chapter 1. Overview * Added description for 100-pin LGA and 80-/64-pin packages to lines 12 and 13 of 1.1; Added description "a maximum of" to "nine channels of serial interface"; Deleted the whole description of "Notes to users" * Changed minimum RAM size "40" in Table 1.1, to "32" * Modified description for "External Bus Expansion", to Table 1.1; Moved this unit below "Clock" * Added "(optional)" for IEBus mode for "Intelligent I/O" in Table 1.2 * Modified description for "Flash memory" in Tables 1.2 * Added "100-pin plastic molded TFLGA (PTLG0100KA-A)" to Table 1.2 * Added Tables 1.3 to 1.6 to provide specifications for 80-/64-pin packages
21, 22
22 25 32 38 43
-- 81 -- --
1.10
Sep 17, 2009
1
2
3
4-7
A- 2
REVISION HISTORY
Rev. Date Page 8
R32C/111 Group Datasheet
Description Summary * Completed "under development" phase of part numbers R5F64110DFB, R5F64111DFB, R5F64112DFB, R5F64114DFB, R5F64115DFB, and R5F64116DFB in Table 1.7 * Added product information for 100-pin LGA and 80-/64-pin packages to Table 1.7 * Added product information for 100-pin LGA and 80-/64-pin packages, and 32-Kbyte RAM to Figure 1.1 * Deleted hyphenation for part number in Figure 1.1 * Added Figures 1.3, 1.4, and 1.6 to 1.8 to provide block diagrams and pin assignment for 100-pin LGA and 80-/64-pin packages * Changed the order of Notes in Figures 1.5 * Added pin No. for 100-pin LGA package to Tables 1.8 to 1.10 * Added Tables 1.11 to 1.14 to provide pin characteristics for 80-/64-pin packages. * Changed the following expression: "A ceramic resonator or a crystal oscillator" for "Main clock input/output" in Table 1.15, to "A crystal, or a ceramic resonator" * Modified descriptions for HLDA and RDY of "Bus control pins" in Table 1.16 * Changed the following expression: "selected" for "Input port" in Table 1.17, to "selectable" * Modified description "TXD2" for TXD0 to TXD8 of "Serial interface" in Table 1.17, to "TXD2 output" * Added Tables 1.19 to 1.21 to provide pin definitions and functions for 80-/64-pin packages Chapter 2. CPU * Made major text modifications to this chapter * Changed the following expression: "a requested interrupt's priority level" in line 2 of 2.1.8.11, to "the interrupt request level" Chapter 3. Memory * Made major text modifications to this chapter * Changed RAM size "40" in line 7 of this chapter, to "63", and address "0000A3FFh" in line 8, to "0000FFFFh" * Added descriptions for 32-Kbyte RAM and 128-Kbyte ROM to Figure 3.1 * Changed two "can be"s in Notes 3 and 4 of Figure 3.1, to "becomes"s Chapter 4. SFRs * Changed hexadecimal format of reset values for registers CCR and FMCR in Table 4.1, to binary * Added FEBC3 register to addresses 000010h-000011h in Table 4.1 * Changed FEBC register for addresses 00001Ch-00001Dh, to FEBC0 in Table 4.1 * Modified the following register name in Table 4.1: "Chip-select Boundary (between n and n + 1) Setting Register", to "Chip-select n and n + 1 Boundary Setting Register"
9
11, 12, 14, 18, 21 13 15-17 19, 20, 22, 23 24
25 26
28-30
-- 33
35
36
A- 3
REVISION HISTORY
Rev. Date Page 37, 38 45 46
R32C/111 Group Datasheet
Description Summary * Changed register names associated with "Start/Stop Condition" for BCNiIC in Tables 4.2 and 4.3, to "Start Condition/Stop Condition" * Modified reset values "XXXX XXXXb" and "XXXX 000Xb" for registers U7RB and U8RB in Table 4.10, to "XXXXh" * Changed expression of register name "Xi Register Yi Register" (i = 0 to 15) and register symbol "XiR, YiR" in Table 4.11, to "Xi Register/Yi Register" and "XiR/YiR", respectively * Changed hexadecimal format of reset values for PDi in Table 4.16, to binary * Modified Note 1 in Table 4.19 * Merged addresses 40090h to 40093h in Table 4.20, into previous page * Modified reset values for IFS0 and IFS2 in Table 4.20; Added Notes 1 to 3 for 80-/64-pin packages and IFS7 register * Modified the following register name in Tables 4.20 to 4.22: "Port Pi_j Port Function Select Register", to "Port Pi_j Function Select Register" * Modified register name "DMAi Request Source Select Register 1" in Table 4.24, to "DMAi Request Source Select Register" * Changed register names "Wake-up Interrupt Priority Level Control Register 2" and "Wake-up Interrupt Priority Level Control Register 1" in Table 4.24, to "Wake-up IPL Setting Register 2" and "Wake-up IPL Setting Register 1", respectively Chapter 5. Electrical Characteristics * Added Notes 2 and 3 for 80-/64-pin packages to Table 5.1 * Added specification of "dVCC1/dt" to Table 5.2; Added Notes 2, 4, and 5 for 80-/64-pin packages * Added Note 2 for Table 5.3 * Added Note 3 for 80-/64-pin packages to Table 5.4 * Modified description "VCC"s in Table 5.6, to "VCC1"s and "VCC2"s * Added Table 5.7 to provide RAM electrical characteristics * Deleted specification of "tPS" from Table 5.8 * Deleted measurement condition for power supply circuit timing characteristics in Table 5.9 * Added "Supply voltage for internal logic" to Figure 5.3 and deleted "CPU clock" from the figure * Changed voltage condition for Table 5.11, from "VCC1 = VCC2 = 3.3 to 5.5 V" to "VCC1 = VCC2 = 4.2 to 5.5 V"; Clarified maximum value for "Vdet" in Table 5.11; Modified self-consuming current "VCC", to "VCC1" * Changed typical value and maximum value for fSO(PLL) in Table 5.12, to "55" and "80" respectively * Changed the following expressions: "PLL frequency synthesizer stabilization time" in Table 5.12, to "PLL lock time" and "tOSC(PLL)", to "tLOCK(PLL)" * Modified description for Note1 of Table 5.13
51 54 55
55-57 59
60 61 62 63 65 66 67
68
A- 4
REVISION HISTORY
Rev. Date Page 70, 82 71, 83 72, 84
R32C/111 Group Datasheet
Description Summary * Added Notes 1 and 2 for 80-/64-pin packages to Tables 5.15 and 5.38 * Deleted ports P7_0, P7_1, and P8_5 for RPULLUP from Tables 5.16 and 5.39; Added Notes 1 and 2 for 80-/64-pin packages * Added "XIN" as "Active" to first, third, and sixth rows of Tables 5.17 and 5.40 * Deleted specification of ICC under condition "Ta = 85C" from Tables 5.17 and 5.40 * Modified minimum value "0.125" for AD in Tables 5.18 and 5.41, to "0.25"; Added Note 1 for 80-/64-pin packages * Clarified three "TBD"s for external bus timing in Tables 5.21 and 5.44 * Corrected a typo "th(C-Q)" in Table 5.30, to "th(C-D)" * Modified maximum value for th(C-D) "30" in Tables 5.30 and 5.53, to "80"
3* Modified minimum value for tw(ADH) in Tables 5.31 and 5.54, to " --------- " AD
73, 85 75, 87 78 78, 90
79, 91 80, 92 81, 93
* Added Tables 5.33 and 5.56 to provide intelligent I/O timing requirements * Changed the third formula of Note 1 in Tables 5.34 and 5.57 * Modified minimum value of th(W-D) "0" in Tables 5.35 and 5.58, to "0.5 x tc(Base)"; Changed the first formula of Note 1 * Modified "Characteristic" for th(C-Q) in Tables 5.36 and 5.59, from "TXDi hold time" to "TXDi output hold time" * Added Tables 5.37 and 5.60 to provide intelligent switching characteristics * Changed measurement condition for "High level input current" in Table 5.39, from "VI = 3 V" to "VI = 3.3 V" * Added a skipped word "error" after "Differential non-linearity" in Table 5.41 * Corrected typos "tw(H)," "tw(L)", "tr", and "tf" in Table 5.43, to "tw(XH)", "tw(XL)", "tr(X)", and "tf(X)", respectively * Changed D15 to D0 output period of write cycle in Figures 5.8 * Changed D15 to D8 output period of write cycle in Figures 5.9 Appendix 1 * Added figures for 100-pin plastic molded LGA, and 80-/64-pin plastic molded LQFP packages
83 85 87 95 96 98, 99
All trademarks and registered trademarks are the property of their respective owners. A- 5
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2009. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2

▲Up To Search▲

Price & Availability of R5F6411FNFN

	To Download R5F6411FNFN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .